AP900, Titan or Tak NJP

Hi, I've got an Orange C14 that needs a mount. The budget is about
$7000 not counting portable pier. Any comparisons or other options?

Thanks,
Chuck

.

Relevant Pages

  • Re: AP900, Titan or Tak NJP
    ... I've got an Orange C14 that needs a mount. ... The budget is about ... >$7000 not counting portable pier. ... Why spend the money mounting an outdated SCT OTA? ...
    (sci.astro.amateur)
  • AP900, Titan or Tak NJP
    ... I've got an Orange C14 that needs a mount. ... The budget is about ... $7000 not counting portable pier. ... Chuck ...
    (sci.astro.amateur)
  • Re: D1-6 Chuck
    ... > When mounting a collett chuck on a lathe with a D1-6 mount, ... Is the closer supposed to be pulled ... >back flush to the lathe spindle plate or ride on the spindles registration ... chuck onto the mount. ...
    (rec.crafts.metalworking)
  • Re: D1-6 Chuck
    ... >> When mounting a collett chuck on a lathe with a D1-6 mount, ... >>back flush to the lathe spindle plate or ride on the spindles registration ... how far are the cams supposed to engage the spuds on the ... >chuck onto the mount. ...
    (rec.crafts.metalworking)
  • Re: Progress 1S Pillar Drill – Jacobs 34 Chuck
    ... The Jacobs 34 chuck comes in at least two forms of mount, ... The threaded mount is a female 5/8 X ... bar to be used to hold the spindle while the chuck is removed. ...
    (uk.rec.models.engineering)