Gluing a diagonal
Hi. Just rebuilt the club's old 6" scope. Sent the mirrors off for a
beral coat. Now the 1.5" diagonal was glued to the faceplate of an old
style diagonal holder/spider. When I get it back, what would you
recommend we use to re-secure the diagonal?
.
Relevant Pages
- Re: Gluing a diagonal
... Just rebuilt the club's old 6" scope. ... Sent the mirrors off for a ... > beral coat. ... Now the 1.5" diagonal was glued to the faceplate of an old ...
(sci.astro.amateur) - Re: We found Saturn!
... able to assemble it without any heartache. ... alignment tools and discovered that my scope, ... crash into one of your mirrors. ... will see, depending on your level of light pollution, a few nebulas ...
(sci.astro.amateur) - Re: Can anyone recommend a company to recoat a SCT secondary?
... scope up against another similar one and compare performance? ... I used a 25+ year old home made telescope that was given to me ... which had two old Edmund mirrors with original coatings. ... had come off, can show extremely faint nebulae, then you can ...
(sci.astro.amateur) - Re: STUNNING image of M51
... > PSF is a Gaussian curve and using Nyquist limit is wrong. ... > right next to the mirrors. ... Coatings acquire pollution and coatings ... of the scope and the amount of backfocus desired. ...
(sci.astro.amateur) - Re: Is ATM dead?
... Telescope Making. ... making their scopes from prebuilt mirrors, tubes, mounts and so forth, that the answer to your question depends what you consider amateur scope making. ... Same with other scope parts. ...
(sci.astro.amateur) |
|
