Re: Building 30" Drum Scope



On May 31, 12:22 am, Chris L Peterson <c...@xxxxxxxxxxxxxxxxxx> wrote:
On Sat, 30 May 2009 09:05:57 -0700 (PDT), Hayden

<haydenflem...@xxxxxxxxx> wrote:
Are you imagining some simple case, like two monochromatic point sources
at infinity, separated by some angle? That would produce two incident
plane waves at different angles with respect to the optical axis.
Yes exactly as you described above. because if the diffraction
patterns created from slanted plane wave is at an angle too.

Well, then you get a more complex interference pattern, that's all. It
isn't an image of the two point sources, though. And in this case, it is
not clear what "resolution" means. The diameter of the Airy disc and its
rings, and the energy distribution within them, is determined by the
nature of the aperture. If you have a pair of sources, you can calculate
what the resulting interference pattern will look like, but there's no
"resolution" involved.
_________________________________________________

Chris L Peterson
Cloudbait Observatoryhttp://www.cloudbait.com

Have you seen any figure with two plane waves, one at
an angle and the resulting complex interterference
pattern produced at the screen without any objective.
I haven't seen this in 4 optic books and over 20 web
sites. I'd like to know the relationship between those
two point source at infinity. In a telescope with lens
or mirror, the two point sources have corresponding
blur points by diffraction and Rayleigh limit is when the
diffraction discs is half the radius of the disc apart. I'd like
to know the corresponding pattern produced in an
aperture without lens/mirror or hole to see why
and how it differs to the aperture with objective.
Have you seen such figure or can create one
youself?

You are saying that even with 2 or more point
sources that produce plane waves at an angle,
the resulting airy pattern would be singular only??
Meaning 2 or more input points would produce
only one fat airy disc unlike in a telescope with
objective where the 2 input points would have their
corresponding blur points or airy disc??

Is the above what you mean? Any illustration of 2 or
more plane waves at an angle in any book
could illustrate the concept well but yet none
of them have this key figure.

Hay
.



Relevant Pages

  • Re: Building 30" Drum Scope
    ... plane waves at different angles with respect to the optical axis. ... patterns created from slanted plane wave is at an angle too. ... Well, then you get a more complex interference pattern, that's all. ... not clear what "resolution" means. ...
    (sci.astro.amateur)
  • Re: Building 30" Drum Scope
    ... an angle and the resulting complex interterference ... pattern produced at the screen without any objective. ... interference pattern from two plane waves and a single circular ...
    (sci.astro.amateur)
  • Re: 8 Ball Patterns Practice
    ... Looks to me like an easier angle on the 8 coming off the 2 ball than taking a chance on getting out of line on the one and having to do something "creative" to get good on the 8. ... The standard 14.1 pattern would be the least desirable of the two ... along the straight in line, and in 14.1 you want to be anywhere *but* ...
    (rec.sport.billiard)
  • Re: Help estimating altitude without altimeter?
    ... The vertical angle is all you need to know. ... It helps when you are in the pattern, but the issue here is what to do ... "head for home" from 10-20 miles away to hit a point that's 1,000' AGL ... The angle for most gliders is very flat but looks ...
    (rec.aviation.soaring)
  • Re: I Need a math guru
    ... So instead of counting full hexes in the calculations I ... I think there must be a similar pattern ... Without the right angle you need too sides and an angle measurement, ... >> counterexamples and the correct results. ...
    (microsoft.public.excel.misc)