Re: P10 Acceleration: Light Speed Doesn't Extrapolate

From: Jonathan Silverlight (jsilverlight_at_spam.merseia.fsnet.co.uk.invalid)
Date: 08/09/04 

Date: Tue, 10 Aug 2004 00:00:29 +0100

In message <e988316b.0408090642.18da4440@posting.google.com>, Ralph
Sansbury <r9ns@bestweb.net> writes
>
> Good to hear you are feeling better.
> What are the formulae for the errors in the lidar and radar
>reflections? The references and discussion on my web page show they
>are large. That is some of the moon reflections are from secondary
>scattering etc and the radar reflections from Venus etc supposedly
>showing different surface heights for different pixels of the image
>have larger error bars so that they are indistinguishable from noise.

How about some references to back up that assertion? Last time this came
up you said Craig Markwardt told you, but we know that was mistaken, to
be charitable.
Is the noise figure in one of the original 1960s papers, or the more
recent Magellan or Pioneer results?
And can you _please_ fix the line wrap on
<http://users.bestweb.net/~sansbury/Doppler/Spacecraft%20Doppler.doc> so
it's more readable?

Relevant Pages

  • Re: P10 Acceleration: Light Speed Doesnt Extrapolate
    ... The references and discussion on my web page show they ... That is some of the moon reflections are from secondary ... >scattering etc and the radar reflections from Venus etc supposedly ... >have larger error bars so that they are indistinguishable from noise. ...
    (sci.optics)
  • Re: Corrupted data from SFPs in a single mode system
    ... Lasers generally have much worse phase noise than amplitude noise. ... reflections to cause this kind of thing (I understand that you're ... is double Rayleigh scattering simply light originating ...
    (sci.optics.fiber)
  • Re: Re: Grading system in uk
    ... >> that Google Science and other references to reflections don't make ... >> A correctly terminated ethernet won't have significant reflections. ... >No. 2.5m minimum between MAUs was something to do with being able to do ... >collision detection, not broken-cable detection. ...
    (uk.misc)
  • Re: Slightly OT. Stacking wideband TV yagis
    ... The higher gain will result in a higher signal to noise ratio. ... With Loads of "wanted" signal at the antenna, an attenuator can then be fitted to reduce the multipath reflections to a level that is lower than the noise floor of the receiver, then the ghosting will disappear. ...
    (uk.radio.amateur)
  • Re: complex orthogonal group
    ... Tobias Fritz wrote: ... > Is SOgenerated by reflections? ... Any hints or ... > references would be appreciated! ...
    (sci.math.research)