Re: common emitter configuration- voltage divider biasing.

From: Joe (nuisancewildlife_at_nospamearthlink.net)
Date: 08/04/04 

Date: Wed, 04 Aug 2004 00:39:26 GMT

"Jonathan Kirwan" <jkirwan@easystreet.com> wrote in message
news:tiiqg0ppmuu3ig216k0jjsssd9e70h5lpg@4ax.com...
> On Sun, 01 Aug 2004 19:15:33 GMT, "Joe"
<nuisancewildlife@nospamearthlink.net>
> wrote:
>
> >My default font says it is 'courier new' whatever that means.
>
> Okay, that's probably right, then. So, you still cannot read the ASCII
> schematics? Frankly, I'm worried that what you are reading as "default
font"
> isn't what is being used to display the text. But I suppose you know what
you
> are doing.
>
> If you are willing to go to some lengths, just to check it, highlight and
copy
> the text you are reading and then paste it into NOTEPAD. Save as text
file.
> Drop into DOS box, type it onto the screen. That'll make sure. (Or, you
could
> simply make sure that NOTEPAD is using a non-truetype system font or else
> Courier New.)
>
> The reason I say all this is that *I* have a great deal of difficulty with
them
> when the font is a proportional spaced font -- often, they are simply
illegible.
> Sometimes, just 'poorly formed' but 'readable, with some pain.' But if
the font
> is fixed-spacing, it should look readable. Of course, I'm assuming you
know
> that -/\/- is a resistor and --||-- is a capacitor, etc.
>
> Jon

Thanks Jon,

No I am not familiar with what the symbols are in an ascii schematic. I
guess that's part of the problem. I'll google on ascii schematic and see if
I can find out.

Joe

Relevant Pages

  • Re: common emitter configuration- voltage divider biasing.
    ... I'm worried that what you are reading as "default font" ... the text you are reading and then paste it into NOTEPAD. ...
    (sci.electronics.basics)
  • Re: quadrature to voltage converter
    ... >>>schematic to ASCII. ... of communicating schematics through an automated generation from ... connection without actually showing the wire or otherwise show it can ... etc. with his ASCII editor. ...
    (sci.electronics.design)
  • Re: quadrature to voltage converter
    ... >Hello Jon, ... >> like editing and modifying schematics done in ASCII. ... I can read a fair amount of German so I wouldn't even mind ...
    (sci.electronics.design)
  • Re: micro power square wave oscillator
    ... Have you considered writing schematic conversion programs, ... So I've no experience with PSpice, Cadence Composer ... and text to ASCII schematic art. ... I find drawing ASCII schematics directly a bit cumbersome. ...
    (sci.electronics.design)
  • Re: quadrature to voltage converter
    ... >Hello Jon, ... >> LTSpice schematics to ascii: ... I draw schematics with Cadsoft Eagle. ...
    (sci.electronics.design)