Re: Need help with a circuit

From: Dark Alchemist (GhostOfACPast_at_gmail.com)
Date: 12/28/04 

Date: 28 Dec 2004 08:48:24 -0800

Well, the posibilities of x would be a sine wave (for this test but
could be anything in reality).

If x <= 0 then y = 0 else if x <1 then y = sqrt(1 - x^2) is as far as I
was able to simplify it.

So, comparator A compares against 0 and comparator B compares <1 but we
do not want the compare at B if A is true.
This is as far as I got before my eyes started to glaze over, heheheh.

Relevant Pages

  • Re: Frequency divider (divide by 100)
    ... supply to simplify things. ... single supply (the datasheet states minimum -4.5/+4.5). ... Is there a better comparator that's readily avaliable in small ... I guess I'm just not too well versed at desigining circuits ...
    (sci.electronics.basics)
  • Re: Frequency divider (divide by 100)
    ... supply to simplify things. ... single supply (the datasheet states minimum -4.5/+4.5). ... Is there a better comparator that's readily avaliable in small ... and then order some free samples;-) ...
    (sci.electronics.basics)
  • Re: Frequency divider (divide by 100)
    ... the comparator output, you should be done. ... supply to simplify things. ... single supply (the datasheet states minimum -4.5/+4.5). ... Is there a better comparator that's readily avaliable in small ...
    (sci.electronics.basics)
  • Re: Reading in frequency of a modulated sine wave using A/D
    ... I need to calculate the frequency of a sine wave of varying frequency ... I use a cross zero detector. ... If you dont do this you will see a pulse train and then your ... I never thought of using a simple comparator which would ...
    (sci.electronics.design)
  • Re: Reading in frequency of a modulated sine wave using A/D
    ... I need to calculate the frequency of a sine wave of varying frequency ... I am using an 8 bit AVR with 10bit sampling. ... For the ultimate convenience, the AVR does have the comparator on the chip, ...
    (sci.electronics.design)