Identifying the legs of a transistor.

From: Joe Norton (ng22311_at_btinternet.com)
Date: 03/04/05 

Date: Fri, 04 Mar 2005 13:31:20 +0000

Hi,

Very basic question. Could someone remind me which leg is which on a
transistor, starting from the tag on the case.

Thanks,
Joe.

Relevant Pages

  • Re: Identifying the legs of a transistor.
    ... Joe Norton wrote: ... Could someone remind me which leg is which on a ... > transistor, starting from the tag on the case. ...
    (sci.electronics.basics)
  • Re: Sorcerer Pinball - Demon Eyes lamp problem
    ... (red lead to left leg, black lead to right leg, then switch them, black lead ... the suspected bad transistor to the others, ... Background" and one is "Flash Eyes." ... to the bulb sockets, the bulbs themselves, a fuse (if all other solenoids ...
    (rec.games.pinball)
  • Re: Sorcerer Pinball - Demon Eyes lamp problem
    ... DMM set to diode test. ... One lead to one leg of the transistor, ... If the bulbs light when you ground the transistor then wiring to the ...
    (rec.games.pinball)
  • Re: TECH: Question about testing tip36c transistor on sttng
    ... I checked for power at the coil and I had 72v on each ... Put the red lead of the DMM on the metal tab of the ... legs of the transistor one at a time. ... Put the black lead of the DMM on the left/top leg of the ...
    (rec.games.pinball)
  • TECH: Question about testing tip36c transistor on sttng
    ... I checked for power at the coil and I had 72v on each ... Put the red lead of the DMM on the metal tab of the ... legs of the transistor one at a time. ... Put the black lead of the DMM on the left/top leg of the ...
    (rec.games.pinball)
Quantcast