Re: wiper nozzle wiring?

On 28 Jun 2005 07:41:44 -0700, "js5895" <JoshTmp@xxxxxxxxxxxx>
wrote:

>Hi,
>
>I bought lighted wiper nozzles for my car. Do I have to cut the head
>light wires
>or is there another way to not cut them. Also if I have to cut the
>wires, what's the best method for splicing them together, if its solder
>can you tell me of a website on how to solder wires.
>

there are plastic wiring devices at automotive stores that will
"tap" power from a wire .... it pushes a metal probe into the one
with power and connects it to the one you want to provide power to.
I'd choose the parking lites and not the headlights if you are going
to use this method. Otherwise get a wiring diagram for you car and
find out where power is provided when the lights are turned on and
tap in there.


.

Relevant Pages

  • Re: Oil Peaked !
    ... We don't have to reinvent electricity, ... The car just might fail, too, if that's the only ones to buy it. ... strung underground with a "ditch witch" sort of machine, but power wires ... people stealing the power, and there'd be no metering possible in order to ...
    (misc.news.internet.discuss)
  • Re: Oil Peaked !
    ... The car just might fail, too, if that's the only ones to buy it. ... They should never have deregulated the power distrubution, ... strung underground with a "ditch witch" sort of machine, but power wires ... So was the railroad, the interstate highway system, rural electrification, ...
    (misc.news.internet.discuss)
  • Re: car stereo inside house?
    ... I want to hook up a car stereo inside my house. ... but don't know what wires from stereo to match up with what ... Power Antenna - Blue ... > blue/white on the deck should be left open. ...
    (rec.audio.car)
  • Re: I screwed up
    ... I had 12.7VDC reading between the power and ground wires (8 ... I put the Power cable in the Ground terminal. ... Reversing power leads on a consumer 12 volt car operated device ain't ... You may just need to replace a fuse. ...
    (sci.electronics.basics)
  • Re: Radio installation problem
    ... I have connected the power leads to a 12 volt pair on the car but the ... radio does not power on. ... Probably a bit obvious but have you connected both 12v wires from the radio ...
    (rec.autos.makers.mazda.miata)