Re: How to connect an LCD module non-permanently

Thanks! Uh, what exactly *is* a pin header? Is it just a strip of
pins that looks like they could plug into an IC socket?

I have some of those, but it looks like I would need to actually solder
it to connect it to the LCD module...

Dan

.

Relevant Pages

  • Re: How to connect an LCD module non-permanently
    ... what exactly *is* a pin header? ... > pins that looks like they could plug into an IC socket? ... Yes, you solder those into the holes, like the jumpers you see on your ... and plug in the mating connector. ...
    (sci.electronics.basics)
  • Re: Is it ok to plug a power strip into another powerstrip?
    ... Someone told me long ago that you shouldn't plug one power strip into ... the load capacity of the single socket it's plugged into on the first, ... Two 4 way strips with any combo in any socket of: ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Its ROM 1.02; more symptoms; can anyone comment?
    ... 40 pin header. ... you need to also replace the 74Fxx chips ... The oscillator needs to be a CMOS type, ... socket that you can sweeze a small zip tie underneath so you can lock ...
    (comp.sys.apple2)
  • Re: Learning PIC - where to start?
    ... but I have a little board with a MAX232 and 5 pin header ... that I can plug in my PIC projects, that does level translation to 5V. ... The 3 $ does not make any difference on the total project costs. ...
    (sci.electronics.design)