Re: GALs and old PCBs
- From: Rich Grise <richgrise@xxxxxxxxxxx>
- Date: Wed, 22 Feb 2006 18:11:50 GMT
On Wed, 22 Feb 2006 11:02:40 +0000, matt wrote:
The board is okay as it works with the original 82S153 (which I can't
dump and don't have a replacement for - I'm testing the GAL on this
board but it will be going on another board (same type) as that one
has a bad 82S153).
Can't dump it? Can't you plug it into a breadboard, put a counter on
the inputs, and see what you get at the outputs?
Then you would at least have a truth table, unless it's got some kind
of embedded state machine or something. It'd also help to know if
the outputs are latched or anything. Is there a data sheet anywhere
on the 82S153?
Good Luck!
Rich
.
- Follow-Ups:
- Re: GALs and old PCBs
- From: matt
- Re: GALs and old PCBs
- References:
- GALs and old PCBs
- From: matt
- Re: GALs and old PCBs
- From: Ben Jackson
- Re: GALs and old PCBs
- From: matt
- GALs and old PCBs
- Prev by Date: Re: GALs and old PCBs
- Next by Date: Re: H-Bridge for Small Motors...
- Previous by thread: Re: GALs and old PCBs
- Next by thread: Re: GALs and old PCBs
- Index(es):
Relevant Pages
|