Blinking LED with C18
- From: "Abstract Dissonance" <Abstract.Dissonance@xxxxxxxxxxx>
- Date: Fri, 10 Mar 2006 05:55:52 -0600
I'm trying to blink an LED using C18 in MPLAB but the code doesn't work for
some reason. It is the exact code that came from one of there examples...
but the LED doesn't blink or even come on. I tried doing some other stuff
but it didn't work either(and I commented it out).
I can't understand why this code doesn't work since "they" created but it
doesn't. I was able to make the 16F688 blink using assembly but I'm trying
to get it done in C with the 18F2455.
Anyone see why this isn't working?
Thanks,
Jon
---------------------------------------------
#include <p18f2455.h>
#pragma config WDT = OFF
void delay (void)
{
int i;
for (i = 0; i < 10000; i++)
{
};
}
void main (void)
{
/* Make all bits on the Port B (LEDs) output bits.
* If bit is cleared, then the bit is an output bit.
*/
//ADCON0 = 0;
// ADCON1 = 0x6;
TRISB = 0;
// TRISA = 0;
// TRISC = 0;
while (1)
{
/* Reset the LEDs */
// PORTA = 0;
PORTB = 0;
// PORTC = 0;
/* Delay so human eye can see change */
delay ();
/* Light the LEDs */
// PORTA = 0xFF;
PORTB = 0xFF;
// PORTC = 0xFF;
/* Delay so human eye can see change */
delay ();
}
}
.
- Follow-Ups:
- Re: Blinking LED with C18
- From: John Jardine.
- Re: Blinking LED with C18
- From: BrunoG
- Re: Blinking LED with C18
- Prev by Date: Speed
- Next by Date: voltage divider bias
- Previous by thread: Speed
- Next by thread: Re: Blinking LED with C18
- Index(es):
Relevant Pages
|
Loading