Help: Need DC Voltage Reducer



I have a DC circuit powered by a 9v battery and I need to power a 1.5v
timer from the same battery. Is there a simple way to reduce the 9v to
1.5v? I have seen the voltage divider circuit in the Forrest Mims book
from Radio Shack: Two resistors in series are connected to the two
terminals of a battery. V+ out is taken from between the two resistors,
V- from the neg. battery contact. V out is determined by the values of
the resistors. I have no problem doing the math, but wouldn't that
circuit short out the battery?

Thanks,
Greg
.



Relevant Pages

  • Re: Faraday "magnetic" induction without a magnetic field.
    ... I already pointed out that instead of 2 resistors with two taps as ... there is no need to even consider "Thevenin". ... If you consider the circuit as having a string of n series ... would be distributed with the battery in circuit- even if non-linear. ...
    (sci.physics.electromag)
  • Re: Faraday "magnetic" induction without a magnetic field.
    ... I already pointed out that instead of 2 resistors with two taps as ... If you consider the circuit as having a string of n ... resistors- all but two being 0, then the total voltage across these two ... would be distributed with the battery in circuit- even if non-linear. ...
    (sci.physics.electromag)
  • Re: Faraday "magnetic" induction without a magnetic field.
    ... The "hidden' batteries belong to Thevenin, ... I already pointed out that instead of 2 resistors with two taps as ... If you consider the circuit as having a string of n ... would be distributed with the battery in circuit- even if non-linear. ...
    (sci.physics.electromag)
  • Re: Help: Need DC Voltage Reducer
    ... timer from the same battery. ... I have seen the voltage divider circuit in the Forrest Mims book ... This will provide you with a steady 1.5V at the timer -- as long as it ... That won't affect the voltage divider too much -- a 1mA timer load will ...
    (sci.electronics.basics)
  • Re: Help: Need DC Voltage Reducer
    ... Depending on the values of the resistors, ... Another way is to set up circuit with the battery, ... timer in series. ... This, too, is not the most efficient possible circuit since most of the ...
    (sci.electronics.basics)

Quantcast