Re: Need help with intermittent circuit failures - JK Flip Flops




However, do I really need to add another IC to my board (the 2nd 555)?
This
board has to be as small as possible... I didn't think I'd need so much
electronics to do this simple task. Maybe 1x 556 (dual 555 IC) instead of
2x 555 would save a little more space??

---
The second 555 isn't necessary. After thinking about it for a
while, Petrus' suggestion to use unused gates to get the delay
turned out to be a good one, so that's what I did. I've posted a
new schematic for you on abse which has that change (as well as
others) on it. After looking the schematic over, if you need a
circuit description I'll be happy to post one here.
---

--------- Hi John, I don't see the new schematic on adse =( Remember how
you couldn't see mine? Looks like the same thing is happening. Please, I
would like to see it =)
If I could get away without the need for an additional IC, I'd be happy.
But if I need it I need it... but I'll probably end up somehow wiring up a
556 rather than two separate 555's. That'd be alright wouldn't it?



The two 15V zener diodes across the motor opposite each other is critical
yeah?

---
Maybe not critical, but you need them in there to clamp any
transients caused by a change of current in the inductance of the
motor.
---

John, please confirm the correct wiring of these zeners on my schematic if
your new schematic doesn't include this section of the circuit. I'm not
100% if I understood what you meant by, "connect two 15V Zener diodes in
series opposition across the motor".

Jason.


.



Relevant Pages

  • Re: Why two fuses for a 5 ton residential AC?
    ... OUTDOOR FAN MOTOR FLA 2.0 ... MAX FUSE OR HACR TYPE CKT BKR SIZE 60/60 AMP ... OUTDOOR CIRCUIT FACTORY CHARGE 118 OZ R22 ... and the 60 AMP SLO-LAG fuses at the shutoff box at the compressor. ...
    (rec.crafts.metalworking)
  • Re: Simple 555 PWM - disappointing performance
    ... >When making a motor controller, you first collect data on the motor, so 0.08 ... >an unusable circuit. ... It's called experimentation, and the fun is often in the journey, not ... language can't be construed as anything but an insult? ...
    (sci.electronics.design)
  • Proper Speed Controller Circuit for 24 VDC motor : electric bycycle
    ... an absolute novice with basic electronics, I was hoping someone here can ... I've basically narrowed the motor down ... throttle set-up for precise control). ... how to decide which particular circuit will suffice for the amp and volt ...
    (sci.electronics.basics)
  • Re: Circuit Designs
    ... The motor will be controlled by a PIC chip embedded in the circuit. ... Is it a cam that's pushing out food at intervals, ... I might suggest a design and pitfalls of ...
    (sci.engr.control)
  • Re: Need help with intermittent circuit failures - JK Flip Flops
    ... Same thing for the power ON-OFF to the motor. ... Professional Circuit Designer ... Imagine the motor is turning in Direction "A", and the reed switch just made ...
    (sci.electronics.basics)