Re: USB Switch with SPDT
- From: Jasen Betts <jasen@xxxxxxxxxxx>
- Date: Wed, 14 Jun 2006 09:43:11 -0000
On 2006-06-13, madhava.Gadicherla@xxxxxxxxx <madhava.Gadicherla@xxxxxxxxx> wrote:
Hi ,
I have an project where in i need to share a USB mass Storage Device
among two HOST PC's. The hosts would not use the Shared resource at the
same time. So I planned to use 4 SPDT Swithes to switch the Storage
device when ever required. When I did implemented this, I found that
the Mass Storage device was not recognized by either of the PC's. Could
anyone explain the reason and method to implement such a solution
Regards
keep the D+/white and D-/green wires twisted for as much of their
length as possible.
istm you may need to ensure that the power terminals (ground/black and +5/red) are
connected first and disconnected last as the plugs are designed to connect
the power terminals before the data terminals.
Bye.
Jasen
.
- References:
- USB Switch with SPDT
- From: madhava . Gadicherla
- USB Switch with SPDT
- Prev by Date: Re: Relay used to control home appliance
- Next by Date: Re: toroidial transformer winding question
- Previous by thread: Re: USB Switch with SPDT
- Next by thread: Re: USB Switch with SPDT
- Index(es):
Relevant Pages
|