Re: coil gauge


"HKJ" <henrik.k.jensen@xxxxxxxxx> wrote in message
news:44bab264$0$67258$157c6196@xxxxxxxxxxxxxxxxxxxxxxxx
Ken O wrote:
I read on the internet that depnding on the gaude size lets 18, it will
take more amp to generate the same EM strenght as with a 30 gauge.
considering there are the same weight of magnet wire to do the coil.
I am not finding much information on this ( different gauge size Vs
coil ) on the internet.

As long as your are making air coils your can use
http://www.miscel.dk/MiscEl/miscelAirCoil.html to calculate the coils.

Its not an air coil, but I'd like to know what are the formulas and how to
use them .

ken


.

Relevant Pages

  • Re: coil gauge
    ... I read on the internet that depnding on the gaude size lets 18, it will take more amp to generate the same EM strenght as with a 30 gauge. ... considering there are the same weight of magnet wire to do the coil. ... I am not finding much information on this (different gauge size Vs coil) on the internet. ...
    (sci.electronics.basics)
  • Re: Coil Calculations?
    ... I have a coil that is wound on a 1.125 inch diameter form and 3 inches ... I am trying to duplicate this coil only instead of using 11 gauge wire ... I am using 12 gauge aluminum wire. ...
    (rec.radio.amateur.homebrew)
  • Re: Williams EM coil substitution?
    ... M = the manufacturer coil form ID ... Try to get as close as possible with gauge and turn #s. ... substituted M1-31-1500 (coin lockout coil) because it's what I had at ...
    (rec.games.pinball)
  • Re: Coils
    ... 28 is the gauge of wire, ... Check the other coil if it's ... > I am working on a chicago coin gun game. ...
    (rec.games.pinball)
  • Re: HELP!!!!
    ... Not yet haven't got a gauge. ... otherwise that's confusing me is that I had put an MSD blaster 2 coil ... checked the voltage to the coil and it was only 4.7 volts. ...
    (rec.autos.makers.vw.aircooled)