Re: SyStem on a chip


itillus@xxxxxxxxx wrote:
I would require a System On a Chip, SOC, which is using 200MHZ Pentium
and plenty of RAM. any advice.

ThankYou
-iTiLLus-


Try some of the toys these guys used.

http://oggonachip.sourceforge.net/

They used these as part of their Masters Thesis.

Michael

.

Relevant Pages

  • Re: kernel panic
    ... Jacques B. wrote: ... new computer has in the way of ram (I have 2 gb of 400 MHz Buffalo ... would look at the right place for the Stage 2 boot loader) that it ... take the advice to do a new install and copy over your data, ...
    (Fedora)
  • Re: Problems with adding RAM to G4
    ... it's highly likely you've got one or two bad RAM ... Jim's advice to rearrange the modules a few times to see if you ... can determine which chips are bad is good advice. ... email to oshea dot j dot j at gmail dot com. ...
    (comp.sys.mac.apps)
  • Re: kernel panic
    ... new computer has in the way of ram (I have 2 gb of 400 MHz Buffalo ... Cloning an install will work great if you are putting the new drive ... adequate foundation of knowledge and experience is not wise. ... take the advice to do a new install and copy over your data, ...
    (Fedora)
  • Re: ram stability problems
    ... >> Throw the existing RAM away and replace it with ECC. ... > with a new pseudorandom pattern. ... I'm not sure which part of my advice you were objecting to. ...
    (comp.os.linux.hardware)
  • Re: motherboard
    ... Best box of the lot was either the 3.4 GHz P4 w/ 1GB ram, ... or the dual processor 2.4 GHz Xeons w/ 2GB ram. ... I installed the same hard drive Edubuntu Dapper image on all of them. ... When building a new system I always check the latest advice at: ...
    (Ubuntu)