Re: How do you wire flourescent light blub to a ballast? And type of ballast do I get?



That means I have to have a wire from all 16 bulbs then back to the
bulbs?

The ballast I saw in this picture shows no switch for the connection:
http://www.naturalhandyman.com/iip/infxtra/i/ballastwiringdiag.jpg



Homer J Simpson wrote:
"mercer7" <thomas.collinsworth@xxxxxxxxx> wrote in message
news:1164577464.732479.292240@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Okay so in english, the "preheat" circuit is best cause the voltage of
the ballast is more than the volt required for the bulb?

Not best, required. While some fluos can strike off voltage alone that is
very unusual.

So a "preheat" circuit solves this problem?

It makes the lamp work, yes. Preheat the filaments, then strike the lamp.

.



Relevant Pages

  • Re: A bang or a whimper?
    ... I was just wondering if Compact Fluorescent bulbs generally fade ... I was thinking the ballast ... with all that noise on the power line. ... as the lamp gets older the voltage drop across it increases. ...
    (rec.aquaria.freshwater.misc)
  • Re: Fluorescent ballasts anyone?
    ... Germicidal T5 bulbs are very different from regular T5s. ... with regular T5 ballast. ... a regular T12 ballast be it switch start, rapid or instant start, magnetic ... I did also run a couple of preheat T5 germicidal bulbs with $18 Electronic ...
    (sci.electronics.design)
  • Re: Fluorescent ballasts anyone?
    ... I'm trying to fix my pool ozon generator and it turned out to be much ... have to find those bulbs and replace them myself. ... First it turned out that it's almost impossible to find an Ozone Producing ... This is the simplest type of fixture, 2 wire magnetic ballast, a bulb ...
    (sci.electronics.design)
  • Re: Fluorescent ballasts anyone?
    ... First it turned out that it's almost impossible to find an Ozone Producing ... everybody cares about our health so 99.99% of all germicidal bulbs ... But as it turned out two ballast also went south, ... First of all, I didn't find what is the working current for regular T12, ...
    (sci.electronics.design)
  • Germicidal lamp ballast
    ... I'm looking for a replacement ballast for a couple of ozone producing ... germicidal lamps for my pool ozonator. ... Does that mean I can use T12 ballast for those germicidal bulbs? ...
    (sci.engr.lighting)