Re: trouble with logic counters
You appear to have things properly tied hi/lo except for one minor
detail. You need a proper power supply to run it. A pair of 10 Meg ohm
resistors does not fill the bill. A 7805 regulator on your battery
would do it but a line powered supply would be better yet. You're on
the right track but you need an engine.
Happy New Year
GG
Yes sir, I just plugged in a 7805 and the thing started working, thanks
for the help
Happy New Year.
.
Relevant Pages
- Re: Altair Questions
... these machines) and the regulated 5 volt regulator output. ... amps and dissipate 2.84 watts, leaving the regulator to "only" pass .79 ... Are you sure that those are not 6.2 ohm resistors? ... three resistors to be mounted on the back side of the Display/Control ...
(comp.os.cpm) - Re: BJT Pair for Push-Pull, 1W, 33V, 200mA, 1MHz (& maybe no heatsink)?
... I had to play with the 806 Ohm split bias resistors' values, ... V), another design could do the power but had 15 nS to 20 nS edges, and i ...
(sci.electronics.design) - Re: Don Kellys pentagon problem
... I say it ends up with two one ohm resistors and one two ohm resistor ... But I'm not much for puzzles and hey, this is a PHYSICS group, not ... it is a mathematical model and the physics involved is no more than Kirchoff's and Ohm's laws-mathematical expressions of what is observed. ...
(sci.physics.electromag) - Re: Tech Help - Earthshaker Interconnect Board Photos Needed
... ohm resistors all reading in the high 7 ohm range, ... J9-2 - N/C ...
(rec.games.pinball) - Re: Quick DC-DC Question - 35V to 12V?
... doesn't matter how you throw away the voltage -- it's all equally bad, ... But resistors don't regulate well... ... with that scheme than with the regulator alone. ... and a 78L12 hasn't got a hope in hell of dissipating the required ...
(sci.electronics.basics) |
|
