Re: Fuse for an AC motor


"Uriah"

I have these 110VAC single phase small AC motors which are driving a
bunch of gears and other parts. Every now and then they will jam up
for one reason or another. They will sit there and fry and I will
have to change the motor out.


** You need a self resetting over-temp cut-out.

Just attach or glue one to the hottest part of the motor and wire it in
series with the AC power.

Piece of cake.

Eg:

http://au.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=732590




........ Phil




.

Relevant Pages

  • Re: Eagle No2 Surface Grinder
    ... >phase convertor, and if so, could you point me in the direction of a ... >The motor is 1hp with a speed of around 1450rpm. ... No reason why this shouldn't run off a phase converter. ... John Stevenson ...
    (uk.rec.models.engineering)
  • stepper motor making weird noises...
    ... funny soundes etc... ... Currently the only way I can get the motor to go a nice speed is to ... ramp it up from maybe 50Hz and then ramping it to a few kHz. ... also is there a reason why I have to ramp it slowly? ...
    (comp.robotics.misc)
  • Re: Fuse for an AC motor
    ... Every now and then they will jam up ... have to change the motor out. ... fuse on one of the leads going to the AC source? ... them and the power is still on they are to hot to touch. ...
    (sci.electronics.basics)
  • Re: Fuse for an AC motor
    ... Every now and then they will jam up ... have to change the motor out. ... fuse on one of the leads going to the AC source? ... them and the power is still on they are to hot to touch. ...
    (sci.electronics.basics)
  • Re: Ipaq 4150 both static and dynamic IP connections needed
    ... >Have you considered putting it in a tiny stand alone utility? ... Not much of a reason to since I already have it working just ... alternator compared to re-rebuilding a motor, ... just a tap or two away ...
    (microsoft.public.pocketpc)