Re: ADC current requirement

I dont know if it is possible to make one pin to be digital 0 output
and a/d converter at the same time. A/D conversion works and it is
possible to monitor it at pc. Same time current goes 0.1 A inside
ADC . My first message had error with zeros. Sorry. There goes so much
current that some of the 0/1 outputs does their thing (like blink led)
even if the Vcc is plugged out. If my chip wouldn work as it does, I'd
say it is totally busted because of current.

help

.

Relevant Pages

  • Re: need simple A/D converter
    ... Walter: ... I dont understand why shall I implement an A/D converter ... ... Eventhough, you page looks very nice to me, HW people ... ...
    (comp.arch.embedded)
  • Re: Mixer recommandation, please
    ... So the only 'analog circuitry' it goes through is the jack and the ... chip designed specifically to interface to A/D converter chips. ... point in this discussion that matters, the claim that latency from the mic-pre ...
    (rec.audio.pro)
  • Re: hd-p2 AD specs/opinions
    ... issues with linearity at low and medium levels. ... an A/D converter in my book). ... most of the time all you can do is talk about the chip. ... It's more meaningful to ask about how good a job a recorder does at its ...
    (rec.audio.pro)
  • Re: DE Star Wars Paint color
    ... The problem is that I dont want to take a chip out of the pin to have ... I figure that someone must have sprayed a little krylon on to one with ...
    (rec.games.pinball)
  • Re: Broken/Fried Parallel port...
    ... Is this a data pin or a status pin on the port that you are attempting ... but the A/D converter IC doesn't seem to se the pin high. ... device is at a low level. ... Do specific pins on a parallel port act that differently ...
    (sci.electronics.misc)