Re: LED Questions (just two: )

Well - look Iike I sent my responce to the Author - Sorry!

So, brightness would be determined by the Current.
Voltage just need to remaine within the operating range of the LEDs.

Am I closer?

Thank you all for your help

.

Relevant Pages

  • Re: Video output transistors for Sylvania Superset
    ... >>brightness, I guess that's a bad sign. ... > Replacing the resistors might help, but the new ones will likely overheat as ... >>can do things like fiddle with the heater voltage to help the tube along ... > Yes you could raise the heater voltage and that might help for a while. ...
    (sci.electronics.repair)
  • Re: 8 LED analog display
    ... >>>independently drive the continous brightness of 8 high powered LED's. ... >>>Before I get cracking with my not very decent electronic design skills, ... >> Spehro Pefhany ... This voltage value, ...
    (sci.electronics.design)
  • Re: 8 LED analog display
    ... I'll use Labview to provide a control voltage, to be the source of the designed circuit. ... This voltage value, needs to encode a 'brightness level' for every single LED, so that any combination of 0 to max of each LED individually may be continously set. ... I guess I need to code the signal, like a multiplexor and then somehow demux the signal to drive the LEDs. ...
    (sci.electronics.design)
  • Re: Driving LEDs with a battery pack
    ... then for most of the life of the battery I see about half brightness. ... you may be able to use a miniature light globe as a current regulator. ... Look for something like a 15 - 25 ma globe, with a voltage rating of say 3 - 7.5 volts. ... As the battery voltage reduces the globe dims, as the lamp filament cools it's resistance lowers and hence somewhat compensates for the sagging voltage. ...
    (sci.electronics.basics)
  • Re: Digital Current Control for LED array
    ... > brightness of all the LEDs should track. ... you change the power supply voltage the brigtnesses will not track unless ... match to be sufficient for small voltage drops in the resistors. ...
    (sci.electronics.design)
Quantcast