Re: Isolation transformer

spamfree@xxxxxxxxxxx wrote:
I'm trying to find out why these are used as safety precautions in
servicing mains connected equipment. Seems to me that not being
electrically connected to the mains is a moot point. Surely the pole
transformer isolates me from the generating dynamo at the power
station, but my outlet can surely still kill me. Induced currents can
surely be as dangerous as directly conducted currents?

Wikipedia states under this heading:

"In electronics testing, troubleshooting and servicing, an isolation
transformer is a 1:1 power transformer which is used as a safety
precaution. Since the neutral wire of an outlet is directly connected
to ground, grounded objects near the device under test (desk, lamp,
concrete floor, oscilloscope ground lead, etc.) may be at a hazardous
potential difference with respect to that device. By using an
isolation transformer, the bonding is eliminated, and the shock hazard
is entirely contained within the device."


Why would things connected to the same ground have dangerous potential
differences from that ground?
Could some kind soul 'splain this to me, please?

In circuits like TV's, manufacturers don't include transformers and often
have circuit ground tied to one side of the AC mains. You can Google on
"hot chassis" for information on this. This is cheaper, but it can also be
quite dangerous. For example, if you connect an oscilloscope ground to the
chassis of a TV, you will likely see sparks fly. It stands to reason then
that touching the chasis while also touching an earth ground will result in
sever shock.

An isolation transformer breaks the DC path to ground. Don't get me wrong,
there will still be plenty of power available in the TV to kill yourself,
you just won't get shocked by touching one hand to the chasis. You will
also be able to ground your scope to the chasis safeley. The output of a
1:1 isolation transformer is just as deadly as the input, it's just not
referenced against an earth ground.


.

Relevant Pages

  • Re: Isolation transformer
    ... electrically connected to the mains is a moot point. ... "In electronics testing, troubleshooting and servicing, an isolation ... transformer is a 1:1 power transformer which is used as a safety ...
    (sci.electronics.basics)
  • Re: really dumb question re direct line powering and safety
    ... audio transformer per each jack so features such as FX loop and DI ... type tasks and are not up to the requirements of mains isolation. ... encase the amp in a plastic cabinet or something and take great care ...
    (alt.guitar.amps)
  • Re: Isolation Transformer and DC corrosion
    ... but the correct method of connecting an isolation ... to have to install an isolation transformer in our dock box. ... therefore all the underwater metal parts of the boat, ... Once the AC power supply to the boat has no ground connection, ...
    (rec.boats.electronics)
  • Re: whats everyone building these days?
    ... link obviously nicely wound his own ferrite core xformer; ... transporting the switching signal across the isolation barrier. ... I am gathering the parts necessary to build and test the transformer ... Inductor design and winding for beginners is a matter of much tedious ...
    (rec.audio.tubes)
  • Re: Isolation transformer
    ... electrically connected to the mains is a moot point. ... "In electronics testing, troubleshooting and servicing, an isolation ... transformer is a 1:1 power transformer which is used as a safety ... chassis of a TV, you will likely see sparks fly. ...
    (sci.electronics.basics)
Loading