Re: Ground fault

On Mon, 25 Jun 2007 14:47:51 -0700, trickyrick <rickj@xxxxxxxxxxxx>
wrote:

Another thought on the idea of current flow through the water being
pumped - there may be air voids in the piping that occur when the pump
is off preventing an honest ohm meter reading.
--

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
.

Relevant Pages

  • Re: Ground fault
    ... Another thought on the idea of current flow through the water being ... pumped - there may be air voids in the piping that occur when the pump ... Remember that three things can trip a GFCI: ...
    (sci.electronics.basics)
  • Homebrew Digest #4915 (December 20, 2005)
    ... flow meters and pedantic esoterica ... Of sight glasses and water filtration ... Wouldn't relative humidity and absolute pressure (altitude and/or ...
    (rec.crafts.brewing)
  • Re: Renewable energy alternative
    ... > water in a hurry. ... Look up 'choked compressible flow'. ... You'll find that with steam, once the downstream pressure drops below about ...
    (sci.energy.hydrogen)
  • Re: Renewable energy alternative
    ... > water in a hurry. ... Look up 'choked compressible flow'. ... You'll find that with steam, once the downstream pressure drops below about ...
    (sci.energy)
  • Re: Well question
    ... On an open loop system it is possible to take water from one well, ... I have an open loop ground source heat pump which operates as you ... You can put the water back - that makes it an injection well. ... Flow rates should be approximately 1.5 to 2 gpm per ton of unit capacity ...
    (alt.home.repair)