Re: Is this practical?
- From: spambait@xxxxxxxxxx (Doug Miller)
- Date: Thu, 28 Jun 2007 17:45:16 GMT
In article <tnq783hrg0a7id67gg5v2m6mcoqav5ha4v@xxxxxxx>, Eric R Snow <etpm@xxxxxxxxxxx> wrote:
My neighbor and I were talking the other day about the frozen pipes in
his shop. This is because he didn't insulate enough the pipes in the
walls and because it's only heated when he is working in it on the
weekends. Now, with the walls covered and with benches permanently
mounted he doesn't even want to consider trying to add more
insulation. As it is just repairing the split pipes will take him at
least 30 hours. He could drain the pipes but he forgot just once hence
the split pipes. He could also leave the water on but that would mean
pumping a lot of water out of the well. So I opened my big mouth and
suggested running a low voltage through the pipes to warm them up.
Let me see if I have this straight.
Electrical code requires metal water pipes to be bonded to the grounding
electrode of the building's electrical system, to ensure that the water piping
is at zero potential with respect to ground and thus eliminate the possibility
of electric shock from touching a water pipe.
And you're proposing deliberately placing a voltage on those pipes.
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
.
- Follow-Ups:
- Re: Is this practical?
- From: Eric R Snow
- Re: Is this practical?
- From: Jon Slaughter
- Re: Is this practical?
- References:
- Is this practical?
- From: Eric R Snow
- Is this practical?
- Prev by Date: Is this practical?
- Next by Date: Re: Analog Switch question
- Previous by thread: Is this practical?
- Next by thread: Re: Is this practical?
- Index(es):
Relevant Pages
|
Loading