Re: Is this practical?



Eric R Snow wrote:

I propose applying 12 to 20
volts to both ends of the pipe.

It'll be more like 1 to 2 volts I suspect.

Graham

.

Relevant Pages

  • Re: Is this practical?
    ... On Thu, 28 Jun 2007 22:10:01 GMT, Eeyore ... Eric R Snow wrote: ... It'll be more like 1 to 2 volts I suspect. ... You have no clue as to the length of the pipe or its OD and ID, ...
    (sci.electronics.basics)
  • Always problems identifying smd diodes
    ... i have a dreambox 7020 who does not supplies the lnb. ... No voltages, no 13 and no 17 volts. ... I suspect a SMD diode marked: ...
    (sci.electronics.repair)
  • Re: Lunchtime News Bulletin
    ... > pumping several thousand volts through a suspect with a Tasser gun is ...
    (uk.media.tv.misc)
  • Re: Lunchtime News Bulletin
    ... tin foil being lead away by the police, perhaps they're going to give him a roasting. ... pumping several thousand volts through a suspect with a Tasser gun is over the top. ...
    (uk.media.tv.misc)
  • Re: Convert battery powered to battery backup
    ... "I suspect that you cannot do it. ... 24 volts is not a supply, ... power from a current transformer to run the unit while the switch ...
    (sci.electronics.basics)
Loading