Re: Best capacitor for back-up applications


"Eeyore" <rabbitsfriendsandrelations@xxxxxxxxxxx> wrote in message
news:46B21F56.6F597036@xxxxxxxxxxxxxx


AJ wrote:

Hi All

I was just wondering what the best type of capacitor I should use for a
back-up application (> 5uA). I am looking for something surface mount
around the 100-330uF range with a low profile and as cheap as possible.
Any
suggestions?

A coin cell ?

Graham


I would rather use a cap as I only need an hour or so of back-up time.

Regards


AJ


.

Relevant Pages

  • Re: Best capacitor for back-up applications
    ... I am looking for something surface mount ... I would rather use a cap as I only need an hour or so of back-up time. ... a reasonable voltage drop after an hour, you're probably looking at ~ 33000uF. ... Use a coin cell. ...
    (sci.electronics.basics)
  • Re: Best capacitor for back-up applications
    ... I was just wondering what the best type of capacitor I should use for a ... I am looking for something surface mount ... around the 100-330uF range with a low profile and as cheap as possible. ... A coin cell? ...
    (sci.electronics.basics)
  • Re: Catching a bite
    ... to work at a capacitor factory (which will remain unnamed to protect the ... Specs called for charging the cap to 10 KV and holding it there for 1 ... there is a THIRD home made test probe. ... juice goes to ground thru the resistor bank. ...
    (alt.sysadmin.recovery)
  • Re: Ceramic Disc Caps for AS2518-61 Squawk and Talk Board
    ... Here they can affect the sound. ... If the capacitor is too small, ... capacitors used in RC circuits ... The value of the cap should ...
    (rec.games.pinball)
  • Re: Capacitors for RF ground
    ... AMPS of RF current going through that cap at 150 watts. ... So, we SHOULD, to be fair, use an RF capacitor that can handle at LEAST ... capacitive reactance is equal to 1/2piFC ... convenient frame member and bolt the cap solid to the metal frame, ...
    (rec.boats.electronics)