Re: TDS 1002 to read high voltage


"anirudh = another FUCKWIT BLOODY TROLL "


i did'nt know that resistors have a maximum voltage.It made sense for
capacitors to have a breakdown voltage because above it the dielectric
medium between the capacitor terminals would break down.But if that is
correct then the voltage divider circuit cannot work.

As i have said above ther is always a time delay between output and
input of any capacitor network.


** That is complete BOLLOCKS !!

Signal transfer via a capacitor is instant.

A capacitive voltage divider has instant response.

For GOD'S sake go look up the topic on Google.


The motivation of using resistors in
place of capacitors is to eliminate this "distortion" of the
signal(due to this time delay).


** A resistive divider is the one that has bloody "time delay" !!

Since the input resistor has to charge any capacitance across the lower arm
of the divider - in this case a scope probe and scope input circuit.



The whole idea of using a resistor network was based on the my totally
ASININE assumptions about a topic I have NO BLOODY CLUE ABOUT .


** Now, it is right


And cant you post your replies in halfway decent language?


** Kindly go DROP FUCKING DEAD !

Please NEVER POST HERE AGAIN !

*** OFF !!!!!!!!!!!



....... Phil


.