Put a source of DC or AC current with an electronical millisecond
switch and a capacitor of the same power like the source with another
switch and finally the load.
When the first switch is on, the other must be off and viceversa, all
the time.
If you will make this circuit to run by keeping only one thing in
your
mind, that is of NEVER PUT THE SOURCE IN DIRECT CONTACT WITH THE
LOAD,
probably you shall have some FREE ENERGY.
I mean the time till your source will be off its power will be much
more greater with this circuit attached than puting in direct contact
the source with the load.
Re: Electrical Outlet Wiring ... a power strip with a 15' extension cord onto the ceiling and then use those ...ceiling) and one that comes out. ... NOT go on or off with the switch.... Perhaps the better choice would be to create a brand new circuit just for ... (alt.home.repair)
Re: Everyone got their generator ready? ... are away and the wife gets the neighbour to switch the thing on. ... a power failure.... In order to hook these up to the grid the invertor has to generate a ...control circuit required to connect an invertor to the grid, ... (uk.business.agriculture)
Re: Simple circuit help... ... > one switch and one wire running through a wing in an airplane. ... > have them on all the time that I have the navigation lights on. ... you can build a little circuit that will 'remember' ... after the power comes up, ... (sci.electronics.basics)
Custom AC power switch ... Having a "popcorn" button on the microwave is completely useless. ... locking everything up, keeping the main power breakers off for the main stove, ... I can arrange to place a hidden switch,... the circuit draw exceeds about 0.1 amp, ... (sci.electronics.design)
Re: Combined voltage regulator + supervisor in TO-220/TO-92 package? ... If the circuit is hooked up to a bench power supply,... > power is stable and a switch applies power to the target circuit, ... > the standard 7805 regulator that will solve the problem. ... (sci.electronics.components)
