Re: Replacing Electret Microphone With Audio Input?

On Feb 17, 12:35 am, "Dave.H" <the19...@xxxxxxxxxxxxxx> wrote:
On Feb 17, 12:28 am, default <defa...@xxxxxxxxxxxxx> wrote:



On Sat, 16 Feb 2008 03:01:28 -0800 (PST), "Dave.H"

<the19...@xxxxxxxxxxxxxx> wrote:

The website also mentions replacing a 10K resistor, with a pot. Would
I need this if I drive the transmitter from an ipod headphone output,
and if so, what resistor should be removed? There are 5 10k units
there.

You see the vertical resistor just on the input where the LR channels
come together? Put a 10K pot in place of it, with the junction of the
LR 10K's to the full clockwise position and ground on the CCW
position. Change the position of the 100 nf to the wiper of the pot
so it connects there and nowhere else.

--

OK thanks, I assume it doesn't matter if I use a linear taper or audio
taper? I want to use a linear taper.

I've got a 10K audio taper pot. Will that also work.
.

Relevant Pages

  • Re: Replacing Electret Microphone With Audio Input?
    ... I need this if I drive the transmitter from an ipod headphone output, ... You see the vertical resistor just on the input where the LR channels ... Change the position of the 100 nf to the wiper of the pot ... I assume it doesn't matter if I use a linear taper or audio ...
    (sci.electronics.basics)
  • Re: Replacing Electret Microphone With Audio Input?
    ... You see the vertical resistor just on the input where the LR channels ... Change the position of the 100 nf to the wiper of the pot ... I assume it doesn't matter if I use a linear taper or audio ...
    (sci.electronics.basics)
  • Re: Good electric bass for upright sound?
    ... it means that a linear taper rather than an audio taper pot ...
    (alt.guitar.bass)
  • Re: A-B type J potentiometer
    ... >> so the Type J pot will work? ... > that the resistive action might be compressed to one end of the scale. ... substituting a linear taper will give you something very close to an ... Those A-B pots didn't use a carbon film for the resistance element; ...
    (sci.electronics.repair)
  • Re: A-B type J potentiometer
    ... >> so the Type J pot will work? ... > that the resistive action might be compressed to one end of the scale. ... substituting a linear taper will give you something very close to an ... Those A-B pots didn't use a carbon film for the resistance element; ...
    (sci.electronics.components)