Putting Red LED's In Osram Dot it light

From: "Dave.H" <the1930s@xxxxxxxxxxxxxx>
Date: Wed, 20 Feb 2008 02:29:30 -0800 (PST)

I want to put 16,000 mcd red LEDs in an Osram Dot it light for working
outside when I don't want my night vision affected, the light in
question has 3 white LED's and a resistor (red-yellow-black-gold-
brown) voltage measured from the pins of the LED's is 3.122 VDC. How
would I go about installing these 2.0 volt red LED's? Do I just
change the resistor, if so what value? Unit is powered by 3 AAA
batteries.
.

Follow-Ups:
- Re: Putting Red LED's In Osram Dot it light
  - From: maxfoo
- Re: Putting Red LED's In Osram Dot it light
  - From: Tom2000
- Re: Putting Red LED's In Osram Dot it light
  - From: Dave.H

Prev by Date: Re: Help me build a bicycle phone charger
Next by Date: Re: Putting Red LED's In Osram Dot it light
Previous by thread: Product design
Next by thread: Re: Putting Red LED's In Osram Dot it light
Index(es):
- Date
- Thread