Re: 5 x 7 dot matrix LCD display
- From: "Dave" <db5151@xxxxxxxxxxx>
- Date: Wed, 2 Apr 2008 08:22:36 -0500
"David L. Jones" <altzone@xxxxxxxxx> wrote in message
news:690775b2-77dc-4c49-9411-4a8616eaf899@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Apr 2, 4:13 pm, "Dave" <db5...@xxxxxxxxxxx> wrote:
"David L. Jones" <altz...@xxxxxxxxx> wrote in
messagenews:135181ac-61c6-4eec-9298-751daeb9e77c@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Apr 2, 1:07 pm, "Dave" <db5...@xxxxxxxxxxx> wrote:
Bought one of these for a couple $ today at my local parts depot. Has
14
pins on each side, and looks like a 3-1/2 or 4 digit display.
Huh?
Dot matrix LCD displays usually come as character based modules like
16x2, 16x1, 8x2, 20x2 etc
Are you saying you have a 4 digit LCD not-matrix character module?
A photo and/or part number would help.
Trying to
figure out how I can test/make use of such a device. Any ideas are
welcome.
Google doesn't help much, at least not with what I have searched on so
far.
What's the part number you are searching on?
Also picked up a 3-1/2 or four digit LCD display mounted in an
aluminum
case
with a 22 pin ribbon cable coming out he back. Says PROTO and some
numbers
on the back. Similarly, any ideas on how to test/make use of such a
device
are welcome.
Well, if you told us what the "some numbers" are that might help.
Is this like a surplus thing from a disposal store?
Fooling around while I try to finish constructing the circuit to which
I
hope to affix such a device.
What exactly do you need?
Dave.
Hey David,
Thanks for the reply. Sorry I couldnt be more specific. The 5x7
dot-matrix
LCD display doesn't have any numbers on it, and yes, it is surplus from
what
amounts to a big junk-box. Will try to see if I can get a decent picture
of
it tomorrow. The other one says PROTO 804055. Couldn't find anything
via
Google... Both of these look like 3-1/2 digit displays. What I am
trying
to do is add a digital display to a transistor tester I am building, for
the
purpose of indicating the gain of the device under test. Was planning on
using a 7106 and an LCD display, but am having trouble finding these
locally. Thus my fiddling with junk parts.
Will try to upload photos to abse tomorrow.
Thanks again,
Dave
In that case forget the surplus stuff and simply use a standard 200mV
FS panel meter like you mention in your previous thread. Forget
getting the 7106 on its own and rolling your own, everyone carries
standard panel meters.
Simply scale your input voltage to suit the (usually) 200mV full
scale.
Dave.
Sigh. Yeah, that's probably what I'm going to end up doing, at least for
the meantime. Sorry for the frustrating questions. Guess I was just
thinking I could make do with something simple and cheap. But then, that
sounds like a standard panel meter :)
Thanks,
Dave
.
- Follow-Ups:
- Re: 5 x 7 dot matrix LCD display
- From: David L. Jones
- Re: 5 x 7 dot matrix LCD display
- References:
- 5 x 7 dot matrix LCD display
- From: Dave
- Re: 5 x 7 dot matrix LCD display
- From: David L. Jones
- Re: 5 x 7 dot matrix LCD display
- From: Dave
- Re: 5 x 7 dot matrix LCD display
- From: David L. Jones
- 5 x 7 dot matrix LCD display
- Prev by Date: Re: filter capacitor sizing calcs
- Next by Date: Re: alternating current
- Previous by thread: Re: 5 x 7 dot matrix LCD display
- Next by thread: Re: 5 x 7 dot matrix LCD display
- Index(es):
Relevant Pages
|