Re: Light on a string?

On Apr 17, 10:13 am, Skrapasor <chesemonkyl...@xxxxxxxxx> wrote:
Or would one lead of the LED go to the resistor and the other lead to
the battery? Also, how do you hook-up a lead or wire to a battery? I
am really new at this.

Hook it up like this. I hope this is clear enough.


1K resistor
.-----------. ___ long lead of LED
| | +-|___|----------------------+
| +||-+ | __
|9V battery | +--------| \ LED
| -||------+ | )
'-----------' | +-----|__/
+--------------------------+
shorter lead of LED



(view in fixed text or courier)

(created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)

Allen
.

Relevant Pages

  • Re: How Do I Connecct my CB to my Battery?
    ... ground the black wire to a good ground, most likely there is a point under ... The normal CB does not draw that much current so a direct battery ... wanna hook up. ... I dont understand this part... ...
    (rec.radio.cb)
  • Re: Light on a string?
    ... Or would one lead of the LED go to the resistor and the other lead to ... how do you hook-up a lead or wire to a battery? ...
    (sci.electronics.basics)
  • Re: OT: Outboard Motor Charging System.
    ... A large portion of the problems with the battery CD units are caused by ... Blue: +12V ignition switch ... Check the voltage on the blue wire at the CD unit. ... Disconnect the white and blue kill wires from the CD and connect a DC ...
    (rec.crafts.metalworking)
  • Re: Battery drain
    ... In my 2000 Sea Ray 185, the thin red fused wire from the ... battery is for the amfm radio memory. ... But still, I would think that even with a bad battery, your volt guage ... an old rule of thumb is a decent charge when running is your alternator ...
    (rec.boats)
  • Re: converter diagnosed
    ... BTW, did you have to run a new, larger, wire to the battery from your ... Any voltage drop through the wiring detracts from the ... Suppose the converter is regulating to 14.2 during the absorption stage. ...
    (rec.outdoors.rv-travel)
Quantcast