Re: Relay setup with two controls.
In article
<1bdc7786-1ae1-46c9-ab59-edb89980d8e1@xxxxxxxxxxxxxxxxxxxxxxxxxxx>,
Mike H <mike8675309@xxxxxxxxx> wrote:
http://i8.photobucket.com/albums/a23/tcw_fort/carparts/wiringcutoffswitch.jpg
The ignition switch turns the car off, correct? So, feed the ignition
switch from the "low amp line" and it should work as desired without
either K1 or K2. Verify before starting that removing input power to the
ignition switch actually kills the engine, I guess.
Fewer parts, less to go wrong.
Otherwise, what you draw should work.
--
Cats, coffee, chocolate...vices to live by
.
Relevant Pages
- Re: diesel starting problems update
... He called us and said that my fuel filter was dead, ... >and tried to start the car and I happened to changed the position of the ... >adj steering wheel and then the lights came on and it started right away. ... airbag) the ignition switch is a slightly bigger, but still managable, ...
(rec.autos.makers.vw.watercooled) - Re: 94 honda accord, ignition problem
... I tried the ignition switch with a screwdriver ... Next time that we tried to crank the engine, ... You will probably find that if you hold the key just right the car ... Also it gets old when they all tell me the car has a "blocked fuel ...
(rec.autos.tech) - Re: Escalating garage costs...what can I do?
... my car recently broke down, with the same fault that occurred 6 months ... they agreed the ignition switch had indeed ... current coming from the starter motor, ... usual setup is that the ig sw controls a relay, ...
(uk.legal) - Re: 92 Honda Accord will not start when temp outside is below 50- HELP!
... This would be my guess as well (not the ignition switch, ... If you need to start the car, or want to verify that this is the problem, use started fluid in to the intake snorkel while someone cranks the car. ... starting in the colder weather. ... I was told to check the resistance of the water temperature sensor. ...
(rec.autos.makers.honda) - Re: odd electric problem
... slightly 'askew' in that when i turn the car off to the accessory position, ... the car is running--comes in real handy when i forget something in the house ... Usually replacing the electrical portion of the ignition switch will ... the key in non-standard switch positions means the lock cylinder is ...
(rec.autos.tech) |
|
