Electronic Ballast for Fluorescent Light [Hack] ?

I have two identical electronic ballasts that will each power a 20 Watt
tubular fluorescent light bulb.

Will the two 20W ballasts drive a single 40W tubular fluorescent light
bulb if the two ballasts are connected (parallel) to the 40 Watt
fluorescent bulb?

insula

(The 20W bulbs are removed from the two circuits before connecting the
ballast circuits to the 40W bulb.)

.

Relevant Pages

  • Re: HID lights onna bike Pt2
    ... Hid the ballasts away nicely (well, they're in view if you know ... Main beam is OK for flashing, dim to start with from the riders POV, ... I've had to dremel out a 25mm hole in the back of each headlight bulb ... Also drilled 2 x 5mm holes in a hidden part of frame plating to mount ...
    (uk.rec.motorcycles)
  • Re: Fluorescent Lights and 130V
    ... I saw a note on the cover of a light that said the tested voltage was 130V. ... Would a fluorescent light (small twisty bulb) be able to take 130V? ... I would ask the CFL manufacturer. ... with electronic ballasts, yet I have seen many (all being dollar store ...
    (alt.home.repair)
  • Re: Electronic Ballast for Fluorescent Light [Hack] ?
    ... tubular fluorescent light bulb. ... Will the two 20W ballasts drive a single 40W tubular fluorescent light ... (The 20W bulbs are removed from the two circuits before connecting the ...
    (sci.electronics.basics)
  • Re: Electronic Ballast for Fluorescent Light [Hack] ?
    ... tubular fluorescent light bulb. ... Will the two 20W ballasts drive a single 40W tubular fluorescent light ... (The 20W bulbs are removed from the two circuits before connecting the ...
    (sci.electronics.basics)
  • Re: Choosing the right ballast
    ... I notice you said that the lamps ... >>on at least one of the four ballasts you mentioned for the ... >knowed to use the PL-S9W/TUV bulb. ... I assumed that my unlabeled bulb were pretty similar to the ...
    (sci.engr.lighting)
Quantcast