Re: Amplifier lamp replacement



"Dave.H" wrote:

Another question I have about this amp. There are four (output)
transistor mounted on a large heatsink at the rear of the chassis, two
of these have two core wires glued on to them.

Glued ? Do they solder to anything ?


These wires are
soldered in holes on the PC board that have the diode ( >| ) symbol.
What are the purpose of these wires?

Bizarre.

Graham

.

Relevant Pages

  • Re: Amplifier lamp replacement
    ... transistor mounted on a large heatsink at the rear of the chassis, ... Do they solder to anything? ...
    (sci.electronics.basics)
  • Re: Amplifier lamp replacement
    ... Eeyore wrote: ... transistor mounted on a large heatsink at the rear of the chassis, ...
    (sci.electronics.basics)
  • Re: Pioneer sx-727 radio dead
    ... Then suddenly today the radio went dead again. ... I took it apart and this time reheated one of the solder ... It worked flawlessly for about 3 days, then spontaneouslt theradio ... Before I could do anything the V shaped metal (heatsink?) attached to ...
    (sci.electronics.repair)
  • Re: Pioneer sx-727 radio dead
    ... Then suddenly today the radio went dead again. ... I took it apart and this time reheated one of the solder ... It worked flawlessly for about 3 days, then spontaneouslt theradio ... Before I could do anything the V shaped metal (heatsink?) attached to ...
    (sci.electronics.repair)
  • Re: Pioneer sx-727 radio dead
    ... I decided to lift the board and look at the solder for the device ... Before I could do anything the V shaped metal (heatsink?) attached to ... It worked flawlessly for about 3 days, then spontaneouslt theradio ... However I'm beginning to think that it is the transistor ...
    (sci.electronics.repair)