Re: Simple design - will it work

Jim Inscribed thus:

Guys

I need to wire up a remote switch for a milling machine in my garage.

Rather than go into a lot of detail all I need to achieve is
continuity betwenn A & B on the linked diagram but I can only use a
momentary switch (SW1)

http://rapidshare.com/files/253373634/2443_001.pdf

Can someone confirm if the planned circuit will work ie when SW1 is
momentarilly closed then continuity will provided aacross A&B until
the 12V power is switched off.

Yes the relay will work fine !

Also on a different topic, I need to connect a 10k pot to my inverter
to vary the power output. Circuit diagram shows 3 connections,

1) +10V (Power terminal of Pot)
2) Analog frequency signal input terminal
3) 0VAnalog common point

Any idea how I identify which pin is which on my pot

For this, more info is needed !

Cheers

Jim

--
Best Regards:
Baron.
.

Relevant Pages

  • Re: Redesigning the ENG Mixer
    ... each fader pot is a push for PFL ... > Plus 1 SPDIF stereo mix ... > A,B,C & D Return Monitor switch ... > Internal NP-1 Style Battery Power & lemo external power ...
    (rec.arts.movies.production.sound)
  • Re: Bridgeport boss 4 Spindle not powering up (continued)
    ... you need to reset a safety interlock on the motor switch pod ... I can work my way through the average power ... activate the spindle all he would get would be a buzzing sound. ... each for a different axis stepper motor drive). ...
    (rec.crafts.metalworking)
  • Re: PC doesnt start
    ... With the switch pressed the voltage are within the specs but, ... I measured the voltage at the Power switch plug, when connected to the MoBo, ... Why then would a power switch or connections be ...
    (microsoft.public.windowsxp.hardware)
  • Re: Protecting the system
    ... Two notices, one "press briefly to shut down" pointing at the power button, ... the plug or, if it has a switch, the PSU. ... minimise writes to the flash device which ext3 would be constantly doing ... The other thing I need to store is the system configuration files - ...
    (uk.comp.os.linux)
  • Re: second power supply
    ... How often do you reach to the back of the computer and switch the main PSU switch off? ... there is always power to the ... The link I provided was to show the workings and wiring of the PS-ON mechanism on a PSU and to counter your argument that more needed to be done than closing the circuit in question to get the PSU to work. ...
    (microsoft.public.windowsxp.general)