Spice Models for 2SC4001 and 2SA1546
From: Kevin Aylward (salesEXTRACT_at_anasoft.co.uk)
Date: 10/27/04
- Next message: Graham Holloway: "Re: Spice Models for 2SC4001 and 2SA1546"
- Previous message: Charles Schuler: "Re: 20V 3A DC regulated power supply"
- Next in thread: Graham Holloway: "Re: Spice Models for 2SC4001 and 2SA1546"
- Reply: Graham Holloway: "Re: Spice Models for 2SC4001 and 2SA1546"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 27 Oct 2004 19:54:46 GMT
Anyone with models for
2SC4001 and 2SA1546
I know they are in the purchased topspice:-)
They for my own use, e.g. at ft=300Mhz, 250V, 7W, 3pf makes for a good
audio amp mosfet driver.
I'd rather not spend the time on making the models, as I'm actually
working/playing around on a simulated mosfet amp. So far its 500W into 8
ohms, at around 1000V/us. It outputs quite a nice square wave at 1Mhz,
but dissipation per mosfet is a tad high at 1KW.
Kevin Aylward
salesEXTRACT@anasoft.co.uk
http://www.anasoft.co.uk
SuperSpice, a very affordable Mixed-Mode
Windows Simulator with Schematic Capture,
Waveform Display, FFT's and Filter Design.
- Next message: Graham Holloway: "Re: Spice Models for 2SC4001 and 2SA1546"
- Previous message: Charles Schuler: "Re: 20V 3A DC regulated power supply"
- Next in thread: Graham Holloway: "Re: Spice Models for 2SC4001 and 2SA1546"
- Reply: Graham Holloway: "Re: Spice Models for 2SC4001 and 2SA1546"
- Messages sorted by: [ date ] [ thread ]