sci.electronics.cad
By Thread

429 messages sorted by: [ date ]

Starting: 02/28/05
Ending: 03/29/05

Problem with LTSpice Robert Baer (03/29/05)
- Re: Problem with LTSpice Helmut Sennewald (03/29/05)
Need a bit of design work done Mike Rocket J. Squirrel Elliott (03/28/05)
- Re: Need a bit of design work done Robert Baer (03/29/05)
  - Re: Need a bit of design work done Mike Rocket J. Squirrel Elliott (03/29/05)
cc2420 pcb design wesam (03/28/05)
SuperSpice and .NODESET orangeKDS_at_mail.ru (03/28/05)
- Re: SuperSpice and .NODESET Robert Baer (03/29/05)
Spice newbee - need book suggestion Anton (03/27/05)
- Re: Spice newbee - need book suggestion Jim Thompson (03/27/05)
  - Re: Spice newbee - need book suggestion Jim Thompson (03/27/05)
- Re: Spice newbee - need book suggestion Charles DH Williams (03/28/05)
  - Thank you! Anton (03/28/05)
Surface Mount Prototyping Breadboards TSSOP SOIC QFP PLCC Leif Erickson (03/27/05)
Protel negative Fernando (03/26/05)
- Re: Protel negative Terry Pinnell (03/26/05)
BGA pin coordinate eeh (03/25/05)
- Re: BGA pin coordinate Paul Burke (03/25/05)
  - Re: BGA pin coordinate Brian Aase (03/25/05)
Problems with SPICE models from vendors Robert Baer (03/25/05)
- Re: Problems with SPICE models from vendors Helmut Sennewald (03/25/05)
  - Re: Problems with SPICE models from vendors zineddine.zidane_at_gmail.com (03/25/05)
  - Re: Problems with SPICE models from vendors Robert Baer (03/25/05)
- Re: Problems with SPICE models from vendors Jim Thompson (03/25/05)
  - Re: Problems with SPICE models from vendors Helmut Sennewald (03/25/05)
  - Re: Problems with SPICE models from vendors Robert Baer (03/25/05)
- Re: Problems with SPICE models from vendors (FIXED!) Robert Baer (03/27/05)
  - Re: Problems with SPICE models from vendors (FIXED!) Tony Williams (03/27/05)
SuperSpice .subckt and variable orangeKDS_at_mail.ru (03/24/05)
- Re: SuperSpice .subckt and variable Jim Thompson (03/24/05)
SPICE on entered schamatic(s) Robert Baer (03/24/05)
- Re: SPICE on entered schamatic(s) Jim Thompson (03/24/05)
- Re: SPICE on entered schamatic(s) Robert (03/24/05)
  - Re: SPICE on entered schamatic(s) Robert Baer (03/24/05)
- Re: SPICE on entered schamatic(s) qrk (03/24/05)
  - Re: SPICE on entered schamatic(s) Robert Baer (03/24/05)
- Re: SPICE on entered schamatic(s) Robert Baer (03/24/05)
  - Re: SPICE on entered schamatic(s) Chuck Harris (03/24/05)
    - Re: SPICE on entered schamatic(s) Mike Engelhardt (03/24/05)
    - Re: SPICE on entered schamatic(s) Robert (03/24/05)
  - Re: SPICE on entered schamatic(s) Tony Williams (03/24/05)
BOM creation in PCAD Kunal (03/23/05)
- Re: BOM creation in PCAD Gary Crowell / VCP (03/24/05)
How to Rename a sheet in ViewDraw (DxDesigner 2.0)? Mohit Jain (03/23/05)
- Re: How to Rename a sheet in ViewDraw (DxDesigner 2.0)? Stuart Brorson (03/23/05)
Electronics Search FAQ - Pointer jason_at_eg3.com (03/21/05)
building your own mic preamp and a/d converter marc (03/20/05)
How important are chamfered routes? rickman (03/18/05)
- Re: How important are chamfered routes? Gary Crowell / VCP (03/19/05)
  - Re: How important are chamfered routes? rickman (03/19/05)
Yahoo group for FreePCB, open source PCB layout rickman (03/18/05)
- Re: Yahoo group for FreePCB, open source PCB layout Andrew (03/25/05)
Re: OT: Search Engines for PC Searching? JeffM (03/18/05)
- Re: OT: Search Engines for PC Searching? JeffM (03/18/05)
Re: OT: Search Engines for PC Searching? Adrian Jansen (03/17/05)
- Re: OT: Search Engines for PC Searching? Robert (03/18/05)
  - Re: OT: Search Engines for PC Searching? Robert (03/18/05)
What is correct method? Ivan (03/17/05)
- Re: What is correct method? Joerg (03/17/05)
- Re: What is correct method? qrk (03/18/05)
  - Re: What is correct method? Gary Crowell / VCP (03/19/05)
    - Re: What is correct method? Brad Velander (03/19/05)
SuperSpice and new component orangeKDS_at_mail.ru (03/16/05)
- Re: SuperSpice and new component Kevin Aylward (03/16/05)
  - Re: SuperSpice and new component orangeKDS_at_mail.ru (03/17/05)
    - Re: SuperSpice and new component Kevin Aylward (03/17/05)
  - Re: SuperSpice and new component Genome (03/17/05)
    - Re: SuperSpice and new component Kevin Aylward (03/18/05)
- Re: SuperSpice and new component orangeKDS_at_mail.ru (03/17/05)
  - Re: SuperSpice and new component Kevin Aylward (03/17/05)
- Re: SuperSpice and new component orangeKDS_at_mail.ru (03/18/05)
  - Re: SuperSpice and new component orangeKDS_at_mail.ru (03/18/05)
  - Re: LTspice Mike Engelhardt (03/19/05)
bezpartyjni Pelacha (03/16/05)
Protel netlist outputs Ivan (03/15/05)
- Re: Protel netlist outputs Brad Velander (03/16/05)
  - Re: Protel netlist outputs Simon Peacock (03/16/05)
- Netlist conversions Ivan (03/17/05)
  - Re: Netlist conversions Roy Battell (03/18/05)
This group is online at www.ugroups.com Daryl (03/15/05)
Protel file strategy Ivan (03/15/05)
- Re: Protel file strategy Brad Velander (03/16/05)
- Re: Protel file strategy Simon Peacock (03/16/05)
Via pads in mid-layers David (03/15/05)
- Re: Via pads in mid-layers Uwe Bonnes (03/15/05)
- Re: Via pads in mid-layers nospam (03/15/05)
- Re: Via pads in mid-layers Helmut Sennewald (03/15/05)
  - Re: Via pads in mid-layers David (03/16/05)
- Re: Via pads in mid-layers Gary Crowell / VCP (03/19/05)
  - Re: Via pads in mid-layers Helmut Sennewald (03/19/05)
    - Re: Via pads in mid-layers Brad Velander (03/19/05)
Need data sheet on TA7179 redd103_at_charter.net (03/15/05)
- Re: Need data sheet on TA7179 Boris Mohar (03/15/05)
Re: Spice2 to spice3 library converter Alex (03/14/05)
- Re: Spice2 to spice3 library converter Jim Thompson (03/14/05)
  - Re: Spice2 to spice3 library converter Mike Engelhardt (03/15/05)
How to add new components from vendors to LT SPICE? ME (03/14/05)
- Re: How to add new components from vendors to LT SPICE? ME (03/15/05)
- Re: How to add new components from vendors to LT SPICE? Mike Engelhardt (03/15/05)
Help with HSPICE subcircuit Patrick (03/13/05)
- Re: Help with HSPICE subcircuit Jim Thompson (03/13/05)
pspice for hydraulics? mc (03/13/05)
- Re: pspice for hydraulics? Jim Thompson (03/13/05)
Help with PSPICE digital simulation Patrick (03/13/05)
- Re: Help with PSPICE digital simulation Jim Thompson (03/13/05)
  - Re: Help with PSPICE digital simulation Patrick (03/13/05)
  - Re: Help with PSPICE digital simulation Patrick (03/13/05)
pspice vs ngspice David Logan (03/12/05)
- Re: pspice vs ngspice Helmut Sennewald (03/12/05)
  - Re: pspice vs ngspice David Logan (03/12/05)
    - Re: pspice vs ngspice Jim Thompson (03/12/05)
    - Re: pspice vs ngspice Helmut Sennewald (03/12/05)
  - Re: pspice vs ngspice Stuart Brorson (03/12/05)
QCad Ken Smith (03/11/05)
Via to track with size Ivan (03/11/05)
- Re: Via to track with size qrk (03/13/05)
  - Re: Via to track with size Ivan (03/15/05)
full version liscence serial no for eagle 4.13 indusarya (03/11/05)
- Re: full version liscence serial no for eagle 4.13 Severi Salminen (03/11/05)
- Re: full version liscence serial no for eagle 4.13 JeffM (03/11/05)
How good is Protel? Clayton Gumbrell (03/11/05)
- Re: How good is Protel? Leon Heller (03/11/05)
- Re: How good is Protel? Simon Peacock (03/11/05)
  - Re: How good is Protel? Clayton Gumbrell (03/13/05)
- Re: How good is Protel? Simon Peacock (03/11/05)
Ivex WinDraft and Cleanup Utility Install Files Needed Ron Jackson (03/10/05)
- Re: Ivex WinDraft and Cleanup Utility Install Files Needed Stuart Brorson (03/13/05)
  - Re: Ivex WinDraft and Cleanup Utility Install Files Needed Ron Jackson (03/13/05)
- Re: Ivex WinDraft and Cleanup Utility Install Files Needed Rich (03/15/05)
I think my copy of PSpice is defective Maaxx (03/10/05)
- Re: I think my copy of PSpice is defective Jim Thompson (03/10/05)
- Re: I think my copy of PSpice is defective Jim Douglas (03/10/05)
  - Re: I think my copy of PSpice is defective Jim Thompson (03/10/05)
- Re: I think my copy of PSpice is defective Jamie (03/12/05)
- Re: I think my copy of PSpice is defective info_at_bostonsemiconductor.com (03/12/05)
Re: PCB layout proxy (03/10/05)
- Re: PCB layout DJ Delorie (03/10/05)
- Re: PCB layout Rich Webb (03/11/05)
Newbie Easytrax Questions Paul Slocum (03/09/05)
- Re: Newbie Easytrax Questions Leon Heller (03/09/05)
  - Re: Newbie Easytrax Questions Paul Slocum (03/09/05)
0.18um cmos model file jason (03/09/05)
- Re: 0.18um cmos model file Jim Thompson (03/09/05)
  - Re: 0.18um cmos model file jason (03/10/05)
  - Re: 0.18um cmos model file jason (03/10/05)
Orcad Layout 7 question: changing silkscreen widths? Chris Smolinski (03/09/05)
- Re: Orcad Layout 7 question: changing silkscreen widths? Ned Forrester (03/09/05)
  - Re: Orcad Layout 7 question: changing silkscreen widths? Chris Smolinski (03/10/05)
Via size Ivan (03/09/05)
- Re: Via size Leon Heller (03/09/05)
  - Re: Via size Ivan (03/09/05)
Protel autorouting track width Ivan (03/09/05)
- Re: Protel autorouting track width Brad Velander (03/16/05)
Smart Tweezers: Automatic RCL meter: Is it any good? Michael (03/09/05)
- Re: Smart Tweezers: Automatic RCL meter: Is it any good? Jonathan Kirwan (03/09/05)
  - Re: Smart Tweezers: Automatic RCL meter: Is it any good? Roger Johansson (03/09/05)
- Re: Smart Tweezers: Automatic RCL meter: Is it any good? john jardine (03/09/05)
Protel 2004 SP2 routing Ivan (03/09/05)
Re: OT: Does this exist? Tim Shoppa (03/09/05)
- Re: OT: Does this exist? Joerg (03/09/05)
EDIF: How far is it? Joerg (03/08/05)
- Re: How far is it? Leon Heller (03/08/05)
  - Re: How far is it? Joerg (03/08/05)
- Re: EDIF: How far is it? JeffM (03/09/05)
  - Re: EDIF: How far is it? Joerg (03/09/05)
Basic PCB software for hobbyist ..... Is there any? Manfred (03/07/05)
- Re: Basic PCB software for hobbyist ..... Is there any? DJ Delorie (03/07/05)
  - Re: Basic PCB software for hobbyist ..... Is there any? kmaryan_at_gmail.com (03/07/05)
    - Re: Basic PCB software for hobbyist ..... Is there any? JeffM (03/08/05)
- Re: Basic PCB software for hobbyist ..... Is there any? Leon Heller (03/07/05)
  - Re: Basic PCB software for hobbyist ..... Is there any? Paul Burke (03/08/05)
- Re: Basic PCB software for hobbyist ..... Is there any? James T. White (03/07/05)
- Re: Basic PCB software for hobbyist ..... Is there any? richard (03/08/05)
urgent...pcb design specs and drc manan.kathuria_at_gmail.com (03/07/05)
Electronics Search FAQ - Pointer jason_at_eg3.com (03/06/05)
Vertical Dimensioning in PCB Ivan (03/05/05)
- Re: Vertical Dimensioning in PCB Brad Velander (03/06/05)
Protel PCB question Ivan (03/04/05)
- Re: Protel PCB question Brad Velander (03/05/05)
  - Re: Protel PCB question Ivan (03/05/05)
    - Re: Protel PCB question Brad Velander (03/06/05)
    - Re: Protel PCB question Ivan (03/07/05)
Drawing Mathematical Blank This A.M. Jim Thompson (03/04/05)
- Re: Drawing Mathematical Blank This A.M. Spehro Pefhany (03/04/05)
  - Re: Drawing Mathematical Blank This A.M. Jim Thompson (03/04/05)
  - Re: Drawing Mathematical Blank This A.M. Genome (03/04/05)
- Re: Drawing Mathematical Blank This A.M. James Meyer (03/05/05)
- Re: Drawing Mathematical Blank This A.M. Don Taylor (03/05/05)
- Re: Drawing Mathematical Blank This A.M. Tony Williams (03/05/05)
  - Re: Drawing Mathematical Blank This A.M. Fred Bloggs (03/05/05)
  - Re: Drawing Mathematical Blank This A.M. Jim Thompson (03/05/05)
- Re: Drawing Mathematical Blank This A.M. Ken Smith (03/05/05)
  - Re: Drawing Mathematical Blank This A.M. Jim Thompson (03/05/05)
Verbatim CD-R's are junk!! Neil (03/03/05)
Re: Wanting to upgrade past Protel Client 3.5 Andrew Tweddle (03/03/05)
- Re: Wanting to upgrade past Protel Client 3.5 Mike Rocket J. Squirrel Elliott (03/04/05)
CAD program. Jamie (03/02/05)
- Re: CAD program. Sander Kool (03/09/05)
Free news server Genome (03/02/05)
- Re: Free news server Genome (03/02/05)
- Re: Free news server Dmitri (03/02/05)
- Re: Free news server Dirk Bruere at Neopax (03/02/05)
  - Re: Free news server Active8 (03/03/05)
- Re: Free news server Rene Tschaggelar (03/02/05)
- Re: Free news server Spajky (03/02/05)
Re: FreePCB compared to Eagle and others? Severi Salminen (03/02/05)
- Re: FreePCB compared to Eagle and others? Thot (03/03/05)
  - Re: FreePCB compared to Eagle and others? Severi Salminen (03/03/05)
Mounting holes in Protel Ivan (03/02/05)
- Re: Mounting holes in Protel Graham Holloway (03/02/05)
- Re: Mounting holes in Protel Peter Bennett (03/02/05)
  - Re: Mounting holes in Protel Brad Velander (03/03/05)
- Re: Mounting holes in Protel Ivan (03/04/05)
Re: OT: Canada Agrees to be Missile Target hhc314_at_yahoo.com (03/02/05)
- Re: OT: Canada Agrees to be Missile Target JeffM (03/02/05)
- Re: OT: Canada Agrees to be Missile Target JeffM (03/02/05)
  - Re: OT: Canada Agrees to be Missile Target Luhan Monat (03/02/05)
- Re: OT: Canada Agrees to be Missile Target Ken Smith (03/02/05)
CadStar apertures zeit_ghost (03/01/05)
- Re: CadStar apertures Leon Heller (03/01/05)
- Re: CadStar apertures Geo (03/01/05)
- Re: CadStar apertures R.Lewis (03/01/05)
- Thanks guys. zeit_ghost (03/03/05)
- re:CadStar apertures zeit_ghost (03/11/05)
Re: BGA in PCB richard (03/01/05)
- Re: BGA in PCB Ingo Cyliax (03/01/05)
  - Re: BGA in PCB Richard Kanarek (03/02/05)
Re: Feedback requested on Target3001 CAD Program Rich (03/01/05)
- Re: Feedback requested on Target3001 CAD Program richard (03/01/05)
Re: Does anyone have spice models for MRF545/MRF544? Maybe from the Intusoft ICAP4 package? Frank Moe (02/28/05)
Active Filter Design Software Recommendation ? rrr_at_ieee.org (02/28/05)
- Re: Active Filter Design Software Recommendation ? Paul Rako (03/09/05)
Re: Multilayer PCB Notes. GMM50 (02/28/05)
Pulsonix or Easy-PC ? with possible path to PADS rrr_at_ieee.org (02/28/05)
- Re: Pulsonix or Easy-PC ? with possible path to PADS Leon Heller (02/28/05)
- Re: Pulsonix or Easy-PC ? with possible path to PADS R.Lewis (02/28/05)
  - Re: Pulsonix or Easy-PC ? with possible path to PADS rrr_at_ieee.org (02/28/05)
    - Re: Pulsonix or Easy-PC ? with possible path to PADS R.Lewis (02/28/05)
Protel Simulation or LTspice? seegoon99_at_yahoo.com (02/28/05)
Re: suggestion regarding a circuit simulator Terry Pinnell (02/28/05)
Protel quick question Ivan (02/28/05)
- Re: Protel quick question Robert Baer (02/28/05)
  - Re: Protel quick question Ivan (03/01/05)
- Re: Protel quick question nospam (03/01/05)
  - Re: Protel quick question Brad Velander (03/01/05)
- Re: Protel quick question Ivan (03/04/05)
Re: gerber to .doc format Peter Bennett (02/28/05)

Last message date: 03/29/05
Archived on: 03/30/05 GMT

429 messages sorted by: [ date ]

sci.electronics.cadBy Thread

sci.electronics.cad
By Thread