Re: How to solve Protel "Warning - net contains unplated pads" ?

On Thu, 21 Apr 2005 21:27:46 +1200, "Simon Pea***"
<nowhere@xxxxxxxxxxx> wrote:

>you will have to look and see if its a problem. Usually they aren't, but
>its best to move the split plane boarder by 10 thou to get rid of the error
>so the next guy doesn't get it too.
>
>And you should never disable DRC options.. except for component clearance
>and acute angles.

It is sometimes impossible to get rid of all DRC errors. It is OK to
have some on a finished board, as long as you know _why_ they are
there, and are sure the board is the way you want.

Having DRC errors does not prevent you from finishing the design
process and producing Gerber and drill files.



--
Peter Bennett VE7CEI
email: peterbb4 (at) interchange.ubc.ca
GPS and NMEA info and programs: http://vancouver-webpages.com/peter/index.html
Newsgroup new user info: http://vancouver-webpages.com/nnq
.