helppppppppppppppppppppppppppppppppp!for design timer

From: yar (st_yar_at_yahoo.com)
Date: 07/28/04


Date: 27 Jul 2004 17:57:32 -0700

I asked a question before and received answers which, although
helpful
to some extent, did not provide me with what I need to know. So, I
decided to rephrase the question.

HI'
     I am yar intellegence then I decide send my problem to solve it
for me .I want to make a timer circuit to control 4point with this
following specification :
 
1- point one connect for an adjustable time with(variable
resistance)then point one disconect aand point two is connect

2- point two connect for an adjustable time with(variable
resistance)then point two disconect and point three is connect

3- point three connect for an adjustable time with(variable
resistance)then point three disconect and point four is connect

4- point four connect for an adjustable time with(variable
resistance)then point four disconect and point one is connect another
time

note: my problem is how can make the first circuit (555) triger the
next circuit
IF there is aanother useful IC's to catch my goal then why not

note :I try this circuit but it isnot worked
right(http://www.tarrypin.dail.pipex.com/images/555Timingchain-yar.gif)
and I this component for each 555

pin1----gnd
pin2----10k resistance&in4148diode&connect to the next 555 pin 3
pin3----connect to a coil relay
pin4----connect to pin8
pin5----connect to 0.01 uf ceramic capacitor(the capacitor in between
pin 5 &gnd)
pin6----connect to 1000 uf&25volt electrolytic(polar)(the negative leg
is connected to gnd)&39k ohm connected in between pin6 & pin7
pin7----connect to 1 M ohm variable resistance in between pin 7&pin 8
pin 8----connect to the vcc (the power supply is 12volt adapter)

I want any help

                                   thank you YAR



Relevant Pages

  • helppppppppppppppppppppppp!for design timer
    ... 1- point one connect for an adjustable time with(variable ... resistance)then point two disconect and point three is connect ... my problem is how can make the first circuit triger the ... pin 8----connect to the vcc ...
    (sci.electronics.cad)
  • helpppppppppppppppppppppppp!for design timer
    ... 1- point one connect for an adjustable time with(variable ... resistance)then point two disconect and point three is connect ... my problem is how can make the first circuit triger the ... pin 8----connect to the vcc ...
    (sci.electronics.equipment)
  • helppppppppppppppppppppppppppp!for design timer
    ... 1- point one connect for an adjustable time with(variable ... resistance)then point two disconect and point three is connect ... my problem is how can make the first circuit triger the ... pin 8----connect to the vcc ...
    (sci.electronics.design)
  • helpppppppppppppppppppppppp!for design timer
    ... 1- point one connect for an adjustable time with(variable ... resistance)then point two disconect and point three is connect ... my problem is how can make the first circuit triger the ... pin 8----connect to the vcc ...
    (sci.electronics.basics)