Hi,
I disassembled a guitar amp, in order to re-solder a bad solder joint.
Now, I need to put it back together.
The PC board has a metal plate screwed onto it.
That plate also screws on to the metal chassis.I disconnected the
plate from the chassis in order to get at the bottom of the PC board.
Between the plate and the chassis is some sort of white paste.
I want to get some more of it so that I can put on better coat; but I
have no idea what it is, what it is for, or where I can get some.
Re: Epiphone Valve Junior ... for plate R between about 4K and 6K and whatever ohm speaker you want to ... This is likely to be great and inexpensive iron.... I've got an amp that runs them at 315v. ... That doesn't include the chassis, tubes, speaker, or cabinet. ... (alt.guitar.amps)
Re: Giving preserved locomotives false identities ... F'rinstance I know of three chassis numbers that have been on one March ... 761s and three chassis that have had the same plate on them... ... partly because if you bend a car you've got a customs ... pushed round the back of the paddock where the race number was changed, ... (uk.railway)
Re: Chassis Design ... and weld or rivet each side to it. ... different width so need to weld a center plate or rivet it ... Nice chassis...... (rec.audio.tubes)
Re: Electrolytic caps? ...Rich Grise wrote: ... >> made to mount the can on a chassis without special tooling. ... >> boxed caps were shipped with the fiber plate as well as a metal plate to ... (sci.electronics.misc)
Re: Electrolytic caps? ...Rich Grise wrote: ... >> made to mount the can on a chassis without special tooling. ... >> boxed caps were shipped with the fiber plate as well as a metal plate to ... (sci.electronics.equipment)
