Re: Help needed - component source
- From: mroberds@xxxxxxxxxxxxxxxx
- Date: Mon, 24 Apr 2006 10:03:41 GMT
Ross Herbert <rherber1@xxxxxxxxxxxxxx> wrote:
Unfortunately, there is no equivalent part having the same footprint
from sources in Australia so I am asking for help to obtain the
correct part from preferably from the UK (I have a relative visiting
Surrey in the next month so they could pick it up or take delivery).
The US Digi-Key catalog has a couple of _vertical_ mount jacks that
might fit the same footprint. RCJ-021 through RCJ-027 will probably
fit if you bend the center pin a bit. These parts only differ in
insulator color.
http://www.cui.com/pdffiles/RCJ-021.pdf
http://rocky.digikey.com/WebLib/CUI%20Inc/Web%20Photo/RCJ-021.jpg
RCJ-051 through RCJ-057 have a plastic block underneath them and might
be a little more substantial, but they also have flat tabs instead of
pins, which may require more circuit board rework:
http://www.cui.com/pdffiles/RCJ-051.pdf
http://rocky.digikey.com/WebLib/CUI%20Inc/Web%20Photo/RCJ-051.jpg
The Digi-Key UK catalog does show stock on some of these parts.
Matt Roberds
.
- References:
- Help needed - component source
- From: Ross Herbert
- Help needed - component source
- Prev by Date: special 330nF/100V wanted!!!
- Next by Date: Re: special 330nF/100V wanted!!!
- Previous by thread: Re: Help needed - component source
- Next by thread: white paste
- Index(es):
Relevant Pages
|
