Re: What do you think of this scope? (Tek)

From: Product developer (jdurban_at_vorel.com)
Date: 09/30/04


Date: 30 Sep 2004 16:33:06 -0700

Paul Burridge <pb@notthisbit.osiris1.co.uk> wrote in message news:<3j9ol0trg9qvv14sk2toeqj0f273b06hhf@4ax.com>...
> This looks quite nifty. Anyone know anything about them?
>
> http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=3842004277&ssPageName=STRK:MEWA:IT

That's a great scope and mainframe. Owned several variations over the
years. Buy it, providing the CRT is still in good shape and can hold a
tight focus!



Relevant Pages

  • Re: TV for oscilloscope
    ... >> Typical deflection voltage is 300 VDC INSIDE the CRT. ... And end up with a basic scope. ... You could spend the time working with a real scope tube and end up ...
    (sci.electronics.design)
  • Re: Tek 2213a high voltage problem
    ... You can turn the scope OFF,pull the white CRT anode plug and discharge the ... CRT anode lead to chassis and if you get a big fat spark,the HV is probably ... used for the old 500 series tube scopes. ...
    (sci.electronics.repair)
  • tektronix D755 CRT problem?
    ... I'm repairing an old telequipment/tektronix D755 scope for a friend. ... After mounting back the EHT pcb it developed ... What seems strange to me is these two transistors dying after ... Now I have a full scan track on the CRT, ...
    (sci.electronics.repair)
  • Re: 465m shorted 95V problems
    ... the scope had been working fine until one day the crt was ... Fuse F558 was blown, (it goes from the 32V unreg to the HV ... and the 95V was loaded down when I only had the anode lead connected. ...
    (sci.electronics.repair)
  • Re: Tektronix 2213 CRT Modification
    ... scope is in great condition, but CRT is very dim. ... Modded scopes should have a Tektronix ID Number label on the rear ... unmodded 7-7.3 VRMS ...
    (sci.electronics.repair)