Re: What's going on in your lab while you're sleeping...

mroberds_at_worldnet.att.net
Date: 01/13/05 

Date: Thu, 13 Jan 2005 09:12:34 GMT

SioL <Sio_spam_L@same.net> wrote:
>http://www.jengajam.com/r/Electronic-Porn

Reminds me of the (mostly G-rated) "Mr. Resistor" and "Bride of
Resistor", short films in stop-action animation. The star is
made out of resistors, caps, etc.

http://www.imdb.com/title/tt0213898/
http://www.imdb.com/title/tt0238098/

Matt Roberds

Relevant Pages

  • UPDATE: Roasblasters power supply problem
    ... I've replaced all caps on the Regulator/Audio III board and the fried R20 resistor. ... Anyway, with the new caps and replaced resistor, I get .9 v at the 5V test point on the regulator board, and the same reading on the 5v test points of the System 1 CPU and cartridge boards. ... I'll be replacing the caps on the board ...
    (rec.games.video.arcade)
  • Re: Low voltage drop capacitance multiplier
    ... >>> return both caps to ground. ... >> using the same total capacitance with one twice-value resistor, ... > show much difference, more HF attenuation, and both plots ... poor capacitor esr modeling can create significant errors. ...
    (sci.electronics.design)
  • Re: Low voltage drop capacitance multiplier
    ... >>> return both caps to ground. ... >> using the same total capacitance with one twice-value resistor, ... > show much difference, more HF attenuation, and both plots ... poor capacitor esr modeling can create significant errors. ...
    (sci.electronics.design)
  • Re: Electrical safety - verifying zero energy in large capacitors
    ... capacitors inside. ... moving toward a requirement that the caps must be grounded and strapped ... provide a safe direct monitoring port to the capacitor terminals. ... Yes, I suppose that works, since you'd be measuring the monitor connector resistor in series with the bleeder resistor. ...
    (sci.electronics.design)
  • Re: DC Power Supply Question
    ... some wall warts don't have any filter caps in them. ... > That means the voltage drops briefly to zero 120 times per second. ... > resistor in SERIES on the output of the wall wart and measure the AC ...
    (sci.electronics.design)