Re: Wireless Heart Rate Monitor
From: Spehro Pefhany (speffSNIP_at_interlogDOTyou.knowwhat)
Date: 02/17/05
- Next message: Rene Tschaggelar: "Re: Seeking Technical Partner"
- Previous message: John Smith: "Re: File transfer protocol for Radio Links"
- In reply to: Dan Major: "Re: Wireless Heart Rate Monitor"
- Next in thread: Dave: "Re: Wireless Heart Rate Monitor"
- Messages sorted by: [ date ] [ thread ]
Date: Thu, 17 Feb 2005 08:31:21 -0500
On Thu, 17 Feb 2005 10:31:44 GMT, the renowned Dan Major
<nospam@this.address> wrote:
>dalai lamah <antonio12358@hotmail.com> wrote in
>news:tte3bb92z7ff.16ura5qxxoeno.dlg@40tude.net:
>
>
>>> I gave up on the Polar stuff
>>> and made my own system using off-the-shelf RF modules at 413MHz.
>>
>> And the "real" heartbeat sensor? What did you use?
>>
>I used the Polar plastic chest strap, just because I was lazy, and it
>worked. For the EKG amp I used a simple programmable-gain instrumentation
>amp (free sample from Analog) which gated a 555. The 555 output was hooked
>to the input to an RF module that was sold by Radio Shack at the time.
>Several other mfgrs make similae (Lynx, Abacom). Unit was slightly larger
>than Polar xmitr as it used two 9v batteries, but still very small.
Sounds like a good application for a Zigbee link.
Best regards,
Spehro Pefhany
-- "it's the network..." "The Journey is the reward" speff@interlog.com Info for manufacturers: http://www.trexon.com Embedded software/hardware/analog Info for designers: http://www.speff.com
- Next message: Rene Tschaggelar: "Re: Seeking Technical Partner"
- Previous message: John Smith: "Re: File transfer protocol for Radio Links"
- In reply to: Dan Major: "Re: Wireless Heart Rate Monitor"
- Next in thread: Dave: "Re: Wireless Heart Rate Monitor"
- Messages sorted by: [ date ] [ thread ]