Re: 2 pulses from 1

From: Terry Pinnell (terrypinDELETE_at_THESEdial.pipex.com)
Date: 03/01/05 

Date: Tue, 01 Mar 2005 22:31:21 +0000

"Reg Edwards" <g4fgq.regp@ZZZbtinternet.com> wrote:

>Just differentiate the square pulse with a CR circuit. Use both the leading
>and trailing edges to trigger something.
>
Read the requirement again. Look at the timing chart... 

-- 
Terry Pinnell
Hobbyist, West Sussex, UK

Relevant Pages

  • Re: [PATCHSET 2.6.22-rc4] sysfs: fix race conditions
    ... timing is right. ... These race conditions are difficult to trigger but with the attached ... All known race conditions are fixed in the current -mm. ... I don't have a tree to merge these patches into, ...
    (Linux-Kernel)
  • Re: Oscilloscope Trigger Time Interpolator
    ... To generate precise timing, you need a fast comparator to set trigger level ... you will need hardware. ... capacitor charging linearly from 0 to 5.0V. ...
    (sci.electronics.design)
  • Re: help me about this very simple stateflow chart
    ... i need intermediate values of a counter 'i' in "for" loop to trigger ... someother functionality in the other chart. ...
    (comp.soft-sys.matlab)
  • Re: Trigger in Stateflow
    ... I'm trying to have a timer in a Stateflow chart ... this trigger input seems to change the sampling time of my ... I didn't find enough information about trigger ... ports and their sample time, but the trigger is a more important ...
    (comp.soft-sys.matlab)
  • Re: help me about this very simple stateflow chart
    ... If you want some other chart/simulink block to trigger within the same time ... In your case this means that your second chart will be function call ... i need intermediate values of a counter 'i' in "for" loop to trigger ... increment i once every time the chart is triggered. ...
    (comp.soft-sys.matlab)