Analog io Controller in DeviceNet

From: srinu (parimisrinivas_at_hotmail.com)
Date: 03/11/05 

Date: 11 Mar 2005 04:07:27 -0800

Dear friends
I am devloping Analog io controller for DeviceNet application.Here i
am using 4 analog inputs ,4 analog out puts.Analog inputs are inputs
of ADC ,output of ADC is input to the DAC here iam geting a analog out
put.
I have a doubt regarding POLL IO messages . I wanted to implement the
Poll IO message .if master wants to send a command to my 4inputs and
4outputs points in my device which work independent of each other. can
any one specify me the poll I/O format for the above inputs and
outputs which should be accomadated in 8 bytes of data .Please help me
in this regard.

Regards
vasu

Relevant Pages

  • Re: ADC "stacking"
    ... of the duration of the analog sample-and-holding, ... The scheme I described depends on the analog sample being acquired ... The best s/h circuits are inside the adc chips, ...
    (sci.electronics.design)
  • Re: Megapixels and noise
    ... High ISO means more analog gain before the ADC, ... The quantization distortion will be the same, ... In the digital domain it's the same, but not in the analog domain. ...
    (rec.photo.digital.slr-systems)
  • Re: Megapixels and noise
    ... High ISO means more analog gain before the ADC, ... In the digital domain it's the same, but not in the analog domain. ...
    (rec.photo.digital.slr-systems)
  • Re: Analog Imager interface to FPGA
    ... They are basically one chip wonders that let you control and convert analog CCD/CIS sensors. ... interface to the imager IC (to the control the read out of imager rows/ ... synchronized to a clock that is sent to the imager IC from the FPGA. ... and an ADC IC. ...
    (comp.arch.fpga)
  • Re: Megapixels and noise
    ... High ISO means more analog gain before the ADC, ... The quantization distortion will be the same, ... In the digital domain it's the same, but not in the analog domain. ...
    (rec.photo.digital.slr-systems)