Re: Audio Tachometer for 2 stroke engine
- From: YD <ydtechHAT@xxxxxxxxxx>
- Date: Wed, 27 Apr 2005 22:09:36 -0300
On Wed, 27 Apr 2005 11:02:33 GMT, "Mook Johnson" <mook@xxxxxxxx>
wrote:
>This is precicely what I'm after and trying to avoid (wires and special
>mounts)
>
>I guy wants to know how fast his hot boat is running and what RPM range its
>operating in, just velcro this puppy on and go for a spin bring it back.
>You will have a log of the run. He can tweek from there if he's losing too
>much RPM in the turns or it's slowing down at the end of the straights.
>
After all this chewing around without reaching some consensus, why not
do some practical experimentation? Stick a mic somewhere close to an
engine, stationary of course, and scope it. My guess is you'll see a
rather well defined waveform from the exhaust with some higher
frequency low level crud superimposed.
- YD.
--
Remove HAT if replying by mail.
.
- References:
- Audio Tachometer for 2 stroke engine
- From: Mook Johnson
- Audio Tachometer for 2 stroke engine
- Prev by Date: Re: Nortel Helios PSU 200A 48V circuit required
- Next by Date: Re: Help! uWave xistor bias oscillates!
- Previous by thread: Re: Audio Tachometer for 2 stroke engine
- Next by thread: Re: Audio Tachometer for 2 stroke engine
- Index(es):