Re: Voltage controlled 10V->100V DC-DC converter

Output current is going to be in the low mA range, though I don't have
an exact number (the load is almost entirely capacitive, with a very
high R in parallel). I was hoping that the physical size would be
something like 1"x1" on a PC board, if possible. And as far as
efficiency, I assume you mean

Power out / Power in ?

If so, I can deal with very low efficiency. I'd have no problem having
a standard rack HP power supply, or a few of them, powering the whole
thing. As far as a control input voltage, I'll be controlling these
DC-DC convters via CPU (with a National Instruments analog I/O board)
that can supply -10V-10V analog (I can do digital too, but sounds more
complicated).

.

Quantcast