Re: Parts Numbering Scheme
- From: "RST Engineering \(jw\)" <jim@xxxxxxxxxxxxxxxxxx>
- Date: Wed, 8 Jun 2005 10:10:10 -0700
In my system (1-2345-6789) all subassemblies start with 8, followed by the
top assembly number, followed by a four digit part number that is invariant
from model to model.
For example, the chassis hardware subassembly for our audio panel model 564
is
8-0564-2203
The chassis hardware subassembly for our navigation receiver model 523 is
8-0523-2203.
Is that what you had in mind?
Jim
> My own preference is for a number system that at least includes an initial
> digit that classifies the part, e.g. 1=RES, 2=CAP, 3=IC, 4=RECT, with
> sub-assemblies being stored with reference to the drawing number system
> (start another thread?)
.
- References:
- Parts Numbering Scheme
- From: Roger Lascelles
- Re: Parts Numbering Scheme
- From: Greg Neff
- Re: Parts Numbering Scheme
- From: John Larkin
- Re: Parts Numbering Scheme
- From: Graham Holloway
- Parts Numbering Scheme
- Prev by Date: a different kind of hybrid
- Next by Date: Re: WiFi dish mod to 3.6GHz?
- Previous by thread: Re: Parts Numbering Scheme
- Next by thread: Re: Parts Numbering Scheme
- Index(es):
Relevant Pages
|
